Difficulty
Easy
Steps
5
Time Required
10 - 20 minutes
Sections
1
- Hard Drive
- 5 steps
Flags
0
BackAcer Chromebook C710-2856
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Removing Back Cover
- Remove the one 4.3mm Phillips #1 screw holding the back cover on.
Remove the one 4.3mm Phillips #1 screw holding the back cover on.
1024
Step 2
Unscrewing the Drive
- Remove the four 2.8mm Phillips #000 screws holding the drive onto the case.
Remove the four 2.8mm Phillips #000 screws holding the drive onto the case.
Step 3
Uncovering the Pins
- Gently pull the foam protector away from the pin connectors
Gently pull the foam protector away from the pin connectors
Step 4
Disconnecting the Drive
- Gently pull the drive up and away to disconnect the hard drive from its seat
Gently pull the drive up and away to disconnect the hard drive from its seat
Step 5
Removed Drive and Pieces
- Fully removed hard drive, screws, and foam cover
Fully removed hard drive, screws, and foam cover
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Josh Rowell
Member since: 10/10/2017
146 Reputation
1 Guide authored
Badges:
3
Team
USF Tampa, Team S6-G5, Remmell Fall 2017
Member of USF Tampa, Team S6-G5, Remmell Fall 2017
USFT-REMMELL-F17S6G5
7 Members
8 Guides authored
