Acer Chromebook C720 2827 Display Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          15 - 20 minutes            

Sections

3

• Back Panel Assembly
• 2 steps
• Battery
• 3 steps
• Display
• 4 steps

Flags

0

• BackAcer Chromebook C720-2827

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel Assembly               

• Remove the thirteen 6.0mm screws on the back panel using your Phillips #1 screwdriver.

Remove the thirteen 6.0mm screws on the back panel using your Phillips #1 screwdriver.

1024

Step 2

• Pry the back panel open with the plastic opening tool.

Pry the back panel open with the plastic opening tool.

Step 3

              Battery               

• Remove the two 6.0mm screws securing the battery with your Phillips #1 screwdriver.

Remove the two 6.0mm screws securing the battery with your Phillips #1 screwdriver.

Step 4

• Carefully pull out the battery wire connected to the battery port.

Carefully pull out the battery wire connected to the battery port.

Step 5

• Slowly lift the battery to remove it from the Chromebook.

Slowly lift the battery to remove it from the Chromebook.

Step 6

              Display               

• Using your fingers, pull the tape off of the display connector.

Using your fingers, pull the tape off of the display connector.

Step 7

• Use the spudger to disconnect the display connector from the motherboard.

Use the spudger to disconnect the display connector from the motherboard.

Step 8

• Use the spudger to gently disconnect the black and white coaxial antenna cables off of the WLAN card.

Use the spudger to gently disconnect the black and white coaxial antenna cables off of the WLAN card.

Step 9

• Using your Phillips #1 screwdriver, unscrew two 3.7mm screws from the right display hinge.
• Using your Phillips #1 screwdriver, unscrew two 5.7mm screws from the left display hinge.
• When removing the display, be careful to unthread the black coaxial antenna cable underneath the motherboard from the opposite side of the panel.

Using your Phillips #1 screwdriver, unscrew two 3.7mm screws from the right display hinge.

Using your Phillips #1 screwdriver, unscrew two 5.7mm screws from the left display hinge.

When removing the display, be careful to unthread the black coaxial antenna cable underneath the motherboard from the opposite side of the panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Sarah Westberg                     

Member since: 03/11/2019

16,818 Reputation

                                      65 Guides authored                  



                       Badges:
                       38







                                                        +35 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored