Difficulty

Moderate

Steps

8

Time Required

                          15 - 20 minutes            

Sections

3

  • Back Panel Assembly
  • 2 steps
  • Battery
  • 3 steps
  • Trackpad
  • 3 steps

Flags

0

  • BackAcer Chromebook C720-2827

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel Assembly               
  • Remove the thirteen 6.0mm screws on the back panel using your Phillips #1 screwdriver.

Remove the thirteen 6.0mm screws on the back panel using your Phillips #1 screwdriver.

1024

Step 2

  • Pry the back panel open with the plastic opening tool.

Pry the back panel open with the plastic opening tool.

Step 3

              Battery               
  • Remove the two 6.0mm screws securing the battery with your Phillips #1 screwdriver.

Remove the two 6.0mm screws securing the battery with your Phillips #1 screwdriver.

Step 4

  • Carefully pull out the battery wire connected to the battery port.

Carefully pull out the battery wire connected to the battery port.

Step 5

  • Slowly lift the battery to remove it from the Chromebook.

Slowly lift the battery to remove it from the Chromebook.

Step 6

              Trackpad               
  • Using a spudger, pry up the locking bar of the ZIF connector on the trackpad and remove the ribbon cable.

Using a spudger, pry up the locking bar of the ZIF connector on the trackpad and remove the ribbon cable.

Step 7

  • Peel off the clear plastic covering the screws.
  • Remove the five grey 2.5 mm screws securing the trackpad with a Phillips #1 screwdriver.
  • Remove another four silver 2.9mm Phillips #1 screws from the silver bracket atop the trackpad with your driver.

Peel off the clear plastic covering the screws.

Remove the five grey 2.5 mm screws securing the trackpad with a Phillips #1 screwdriver.

Remove another four silver 2.9mm Phillips #1 screws from the silver bracket atop the trackpad with your driver.

Step 8

  • Lift up the silver bracket.
  • Remove the trackpad by lifting it up from the case.

Lift up the silver bracket.

Remove the trackpad by lifting it up from the case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Austin Blakely                     

Member since: 03/11/2019

16,291 Reputation

                                      52 Guides authored                  



                       Badges:
                       37







                                                        +34 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored