Acer Chromebook C720 2844 Touch Pad Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          15 - 20 minutes            

Sections

2

• Battery
• 3 steps
• Touch Pad
• 5 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackAcer Chromebook C720-2844

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Battery               

• Flip to the back cover of the laptop.
• Remove the 1 cm Phillips #00 screws on the back cover.
• Use pry tools to remove the back cover.

Flip to the back cover of the laptop.

Remove the 1 cm Phillips #00 screws on the back cover.

Use pry tools to remove the back cover.

1024

Step 2

• Take out your Phillips #00 screwdriver.
• Remove the 1 cm screws of the battery. There are two of screws, one is on the left of the battery and the other is on the right. (circled in red).

Take out your Phillips #00 screwdriver.

Remove the 1 cm screws of the battery. There are two of screws, one is on the left of the battery and the other is on the right. (circled in red).

Step 3

• Unplug the battery from the motherboard by pulling the bundled cable connector free.
• Lift the top part of battery.
• Slide the battery forward to remove it completely from the motherboard.

Unplug the battery from the motherboard by pulling the bundled cable connector free.

Lift the top part of battery.

Slide the battery forward to remove it completely from the motherboard.

Step 4

              Touch Pad               

• Lift white tab holding connector.
• Pull from blue tab to disconnect.

Lift white tab holding connector.

Pull from blue tab to disconnect.

Step 5

• Unscrew and remove the four 1 cm Phillips #00 screws under transparent cover.

Unscrew and remove the four 1 cm Phillips #00 screws under transparent cover.

Step 6

• Unscrew and remove the two 1 cm Phillips #00 screws that secure the touchpad bracket.
• Lift bracket to remove from touchpad.

Unscrew and remove the two 1 cm Phillips #00 screws that secure the touchpad bracket.

Lift bracket to remove from touchpad.

Step 7

• Remove the tape securing the touchpad to the shell.

Remove the tape securing the touchpad to the shell.

Step 8

• Lift and remove touchpad.

Lift and remove touchpad.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Christian Madrigal                     

Member since: 02/10/2022

229 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Gateway, Team 1-2, Pee Spring 2022                        

                                                  Member of Gateway, Team 1-2, Pee Spring 2022 



                    GCC-PEE-S22S1G2                     


                                            4 Members                     


                                            4 Guides authored