Difficulty

Moderate

Steps

4

Time Required

                          5 - 15 minutes            

Sections

1

  • Heat Sink and Cooling Fan
  • 4 steps

Flags

0

  • BackAcer Chromebook C720

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Heat Sink and Cooling Fan               
  • Operating on your device while it is on, or plugged in may result in electrical shock. Make sure the device is not powered before continuing.
  • Remove the thirteen 6mm screws using the Phillips #0 screwdriver.
  • Gently pry the back plate off using the plastic opening tool, leveraging the groove along the device’s hinge.

Operating on your device while it is on, or plugged in may result in electrical shock. Make sure the device is not powered before continuing.

Remove the thirteen 6mm screws using the Phillips #0 screwdriver.

Gently pry the back plate off using the plastic opening tool, leveraging the groove along the device’s hinge.

1024

Step 2

  • Remove the four 3mm screws securing the heat sink using the Phillips #0 screwdriver.
  • Remove the two 3mm screws securing the fan using the Phillips #0 screwdriver.

Remove the four 3mm screws securing the heat sink using the Phillips #0 screwdriver.

Remove the two 3mm screws securing the fan using the Phillips #0 screwdriver.

Step 3

  • Gently pry the fan module away from the motherboard. After a bit of force, it should pop out of its slot.
  • Carefully unwrap the wires from around the fan.

Gently pry the fan module away from the motherboard. After a bit of force, it should pop out of its slot.

Carefully unwrap the wires from around the fan.

Step 4

  • Gently disconnect the fan module from the motherboard.

Gently disconnect the fan module from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Benjamin Rahman                     

Member since: 04/01/2019

505 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       IUPUI, Team S2-G5, Harley Spring 2019                        

                                                  Member of IUPUI, Team S2-G5, Harley Spring 2019 



                    IUPUI-HARLEY-S19S2G5                     


                                            4 Members                     


                                            7 Guides authored