Acer Chromebook C731 C8Ve Display Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          5 minutes            

Sections

1

• Display Assembly
• 5 steps

Flags

0

• BackAcer Chromebook C731-C8VE

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Make sure to follow all hazard warnings for your safety.

What you need

Step 1

              Display Assembly               

• Place the Chromebook face down.

Place the Chromebook face down.

1024

Step 2

• Make sure to completely turn off the device before beginning this step.
• Use a JIS #00 screwdriver to remove the 11 screws on the underside of the laptop.
• The 2 mm screws marked orange have washers attached and must be placed in these specific areas.
• These 2 mm screws do not have washers and will be located on the left and right of the device.

Make sure to completely turn off the device before beginning this step.

Use a JIS #00 screwdriver to remove the 11 screws on the underside of the laptop.

The 2 mm screws marked orange have washers attached and must be placed in these specific areas.

These 2 mm screws do not have washers and will be located on the left and right of the device.

Step 3

• Use the iFixit opening tool to remove the keyboard from the device by prying it loose from the base.

Use the iFixit opening tool to remove the keyboard from the device by prying it loose from the base.

Step 4

• Use the JIS #00 screwdriver to remove the four 1.5mm screws that connect the base of the laptop to the screen. There are two screws on each latch.
• Carefully detach the cables that connect the screen to the motherboard. This includes a black display cable that connects to the mother board and two wires that connect to the Wi-Fi card.

Use the JIS #00 screwdriver to remove the four 1.5mm screws that connect the base of the laptop to the screen. There are two screws on each latch.

Carefully detach the cables that connect the screen to the motherboard. This includes a black display cable that connects to the mother board and two wires that connect to the Wi-Fi card.

Step 5

• Do this step slowly to ensure that you do not damage the screen or the motherboard.
• Remove the screen from the base of the device.

Do this step slowly to ensure that you do not damage the screen or the motherboard.

Remove the screen from the base of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Justin Menninger                     

Member since: 03/21/2022

385 Reputation

                                      3 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       University of Alabama, Team 3-1, Bedsole Spring 2022                        

                                                  Member of University of Alabama, Team 3-1, Bedsole Spring 2022 



                    UA-BEDSOLE-S22S3G1                     


                                            4 Members                     


                                            4 Guides authored