Acer Chromebook C732 Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          2 minutes

Sections

Battery
4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackAcer Chromebook 11 C732
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Once the new battery is installed you will need to bring the device out of storage mode, once this guide is completed. You will need to plug the device into a charger and a power source, and simply power up the device.

This needs to be done once the battery is replaced as the device will go into a battery disconnected state once the old battery is removed from the device.

What you need

Step 1

              Opening up your device

Flip the computer over, and using a Phillips #1 screwdriver, remove all 12 bottom cover screws.
Once all the screws are removed, place both pointer fingers between the screen hinges and the case and carefully pry the case away from the hinges.

Flip the computer over, and using a Phillips #1 screwdriver, remove all 12 bottom cover screws.

Once all the screws are removed, place both pointer fingers between the screen hinges and the case and carefully pry the case away from the hinges.

1024

Step 2

              Remove the ESD tape

Once the back cover is removed, you will see that the battery is only held in place with a piece of ESD Tape. Using a set of tweezers, carefully peel away the tape from one end.

Once the back cover is removed, you will see that the battery is only held in place with a piece of ESD Tape. Using a set of tweezers, carefully peel away the tape from one end.

Step 3

              Disconnect your battery

Once the tape is removed, you can use the pointed end of a Spudger or your fingernails and carefully unplug the battery from the logic board.

Once the tape is removed, you can use the pointed end of a Spudger or your fingernails and carefully unplug the battery from the logic board.

Step 4

              Remove your old battery

The battery can now be removed.
To install the new battery, follow these steps in reverse order.

The battery can now be removed.

To install the new battery, follow these steps in reverse order.

The device will be in a battery disconnected state. This means that the device will not simply power on once the battery is reconnected. To bring the device out of storage mode, plug the device into a charger and a power source. You can then power on the device like normal.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    Jacob Mehnert

Member since: 10/18/2021

12,621 Reputation

                                      31 Guides authored                  



                       Badges:
                       42







                                                        +39 more badges

Team

                       iFanatics                        

                                                  Member of iFanatics 



                    Community                     


                                            49 Members                     


                                            102 Guides authored

Member-Contributed Guide#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Member-Contributed Guide

Introduction

What you need

Team