Acer Chromebook C732 Screen Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          5 minutes            

Sections

1

• Screen
• 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackAcer Chromebook 11 C732

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Safety First               

• Make sure your device is turned off and disconnect your battery from the motherboard.
• You can find a detailed guide for getting to and replacing this device’s battery here

Make sure your device is turned off and disconnect your battery from the motherboard.

You can find a detailed guide for getting to and replacing this device’s battery here

1024

Step 2

• Open the Chromebook so the display is facing towards you.

Open the Chromebook so the display is facing towards you.

Step 3

• Using a plastic opening tool or a spudger, carefully pry the plastic bezel around the screen.
• If you start in the corner, you should be able to release the tabs there. Once those tabs have been released, you can release the rest by hand.

Using a plastic opening tool or a spudger, carefully pry the plastic bezel around the screen.

If you start in the corner, you should be able to release the tabs there. Once those tabs have been released, you can release the rest by hand.

Step 4

• Remove the four screws holding the display in place with a Phillips #1 screwdriver.
• Carefully lower the display to rest on the keyboard.

Remove the four screws holding the display in place with a Phillips #1 screwdriver.

Carefully lower the display to rest on the keyboard.

Step 5

• The display connector is located on the back and is covered by some adhesive tape.
• Carefully peal the tape back
• Once the tape is peeled back, you can lift the bar to disconnect the display cable.

The display connector is located on the back and is covered by some adhesive tape.

Carefully peal the tape back

Once the tape is peeled back, you can lift the bar to disconnect the display cable.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Jacob Mehnert                     

Member since: 10/18/2021

12,621 Reputation

                                      31 Guides authored                  



                       Badges:
                       42







                                                        +39 more badges                           

Team

                       iFanatics                        

                                                  Member of iFanatics 



                    Community                     


                                            49 Members                     


                                            102 Guides authored