Acer Chromebook C740 Lcd Screen Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          15 minutes            

Sections

1

• LCD Screen
• 6 steps

Flags

0

• BackAcer Chromebook C740

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              LCD Screen               

• Power down the Chromebook and disconnect the power adapter.

Power down the Chromebook and disconnect the power adapter.

1024

Step 2

• With the Chromebook open and face up, pry the black screen frame with your fingers.
• Move slowly around the display to evenly remove it.
• Clicking sounds indicate the panel is seperating from the overall display.

With the Chromebook open and face up, pry the black screen frame with your fingers.

Move slowly around the display to evenly remove it.

Clicking sounds indicate the panel is seperating from the overall display.

Step 3

• Once the frame is separated from the display, angle the display assembly back .
• Lift up the portions of the frame covering the front two hinges with the spudger.

Once the frame is separated from the display, angle the display assembly back .

Lift up the portions of the frame covering the front two hinges with the spudger.

Step 4

• Remove the frame from the screen assembly by pulling the frame towards you.
• Some adjustment of the display assembly may be needed so that the frame is not stuck near the hinges.

Remove the frame from the screen assembly by pulling the frame towards you.

Some adjustment of the display assembly may be needed so that the frame is not stuck near the hinges.

Step 5

• Remove the six 3.35mm screws with a Phillips #0 Screwdriver.

Remove the six 3.35mm screws with a Phillips #0 Screwdriver.

Step 6

• Place the LCD screen face down on the keyboard.
• Remove the tape holding the black connector in place.
• Unplug the connector with your hands.

Place the LCD screen face down on the keyboard.

Remove the tape holding the black connector in place.

Unplug the connector with your hands.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Grace Bassett                     

Member since: 04/26/2017

217 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team S22-G2, Livingston Spring 2017                        

                                                  Member of Cal Poly, Team S22-G2, Livingston Spring 2017 



                    CPSU-LIVINGSTON-S17S22G2                     


                                            4 Members                     


                                            12 Guides authored                     

Keith Hudson - May 16, 2018

Reply

You actually don’t need to unscrew the middle screws, and you don’t need to buy a new bezel.