Acer Chromebook Cb3 111 C8Ub Audio Jack Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Back Panel Removal
3 steps
Audio Jack
1 step

Flags

BackAcer Chromebook CB3-111-C8UB
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Panel Removal

Position the laptop upside down with the hinges on the side furthest away from you.
Remove the eight 8mm screws with a phillips #1 screwdriver,
Remove the four 4.5mm screws with a phillips #1 screwdriver,

Position the laptop upside down with the hinges on the side furthest away from you.

Remove the eight 8mm screws with a phillips #1 screwdriver,

Remove the four 4.5mm screws with a phillips #1 screwdriver,

1024

Step 2

There is a wire connecting the two pieces of the laptop, from the inside, on the left, be careful not to damage it.
Use the plastic opening tool to pry open then remove the plastic base from the rest of the laptop. Start from the right side and work towards the left.
Set the plastic base beside the laptop by opening it as if you were opening a book.

There is a wire connecting the two pieces of the laptop, from the inside, on the left, be careful not to damage it.

Use the plastic opening tool to pry open then remove the plastic base from the rest of the laptop. Start from the right side and work towards the left.

Set the plastic base beside the laptop by opening it as if you were opening a book.

Step 3

Flip up the small white ZIF connector by using a fingernail or metal spudger.
Pull the blue tab to remove the ribbon cable.
The ribbon cable is adhered to the plastic so it will take a little bit of force to remove it.

Flip up the small white ZIF connector by using a fingernail or metal spudger.

Pull the blue tab to remove the ribbon cable.

The ribbon cable is adhered to the plastic so it will take a little bit of force to remove it.

Step 4

              Audio Jack

Remove the three 4.5mm screws using a phillips #1 screwdriver.
Now remove the chip.

Remove the three 4.5mm screws using a phillips #1 screwdriver.

Now remove the chip.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Ryan Locatelli

Member since: 01/27/2017

161 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 22-7, Maness Winter 2017                        

                                                  Member of Cal Poly, Team 22-7, Maness Winter 2017 



                    CPSU-MANESS-W17S22G7                     


                                            4 Members                     


                                            12 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team