Difficulty
Easy
Steps
5
Time Required
5 - 10 minutes
Sections
1
- Battery
- 5 steps
Flags
0
BackAcer Chromebook CB3-131-C3KD
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Make sure you turn off the laptop before starting.
- Unscrew and remove the (11) eleven 4mm J0 head screws on the underside of the laptop using the JIS #0 screwdriver.
Make sure you turn off the laptop before starting.
Unscrew and remove the (11) eleven 4mm J0 head screws on the underside of the laptop using the JIS #0 screwdriver.
1024
Step 2
- Use the plastic opening tool to remove the back cover.
- Be careful not to damage the ribbon cable connecting the back cover to the laptop.
Use the plastic opening tool to remove the back cover.
Be careful not to damage the ribbon cable connecting the back cover to the laptop.
Step 3
- Unscrew the (2) two 3mm J0 Phillips head screws that hold the battery in place.
Unscrew the (2) two 3mm J0 Phillips head screws that hold the battery in place.
Step 4
- Disconnect the battery from the motherboard.
- Carefully disconnect the cable parallel to the board, not at an angle. Otherwise, you could damage the port.
Disconnect the battery from the motherboard.
Carefully disconnect the cable parallel to the board, not at an angle. Otherwise, you could damage the port.
Step 5
- Carefully lift the battery from one side, and then lift it out of the laptop.
Carefully lift the battery from one side, and then lift it out of the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
9 other people completed this guide.
Author
with 2 other contributors
Ashley Oxner
Member since: 09/26/2017
677 Reputation
3 Guides authored
Badges:
21
+18 more badges
Team
USF Tampa, Team S11-G1, Passmore Fall 2017
Member of USF Tampa, Team S11-G1, Passmore Fall 2017
USFT-PASSMORE-F17S11G1
3 Members
10 Guides authored