Difficulty

Moderate

Steps

9

Time Required

                          5 - 8 minutes

Sections

2

  • Battery
  • 5 steps
  • Trackpad
  • 4 steps

Flags

0

  • BackAcer Chromebook CB3-131-C3KD

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Make sure you turn off the laptop before starting.
  • Unscrew and remove the (11) eleven 4mm J0 head screws on the underside of the laptop using the JIS #0 screwdriver.

Make sure you turn off the laptop before starting.

Unscrew and remove the (11) eleven 4mm J0 head screws on the underside of the laptop using the JIS #0 screwdriver.

1024

Step 2

  • Use the plastic opening tool to remove the back cover.
  • Be careful not to damage the ribbon cable connecting the back cover to the laptop.

Use the plastic opening tool to remove the back cover.

Be careful not to damage the ribbon cable connecting the back cover to the laptop.

Step 3

  • Unscrew the (2) two 3mm J0 Phillips head screws that hold the battery in place.

Unscrew the (2) two 3mm J0 Phillips head screws that hold the battery in place.

Step 4

  • Disconnect the battery from the motherboard.
  • Carefully disconnect the cable parallel to the board, not at an angle. Otherwise, you could damage the port.

Disconnect the battery from the motherboard.

Carefully disconnect the cable parallel to the board, not at an angle. Otherwise, you could damage the port.

Step 5

  • Carefully lift the battery from one side, and then lift it out of the laptop.

Carefully lift the battery from one side, and then lift it out of the laptop.

Step 6

              Trackpad
  • Remove the (3) three 7.0mm screws using the J0 screwdriver head.

Remove the (3) three 7.0mm screws using the J0 screwdriver head.

Step 7

  • Unlock the latches on both ends of the ribbon cable, and pull to detach.
  • The ribbon cable will still be attached to the tape.

Unlock the latches on both ends of the ribbon cable, and pull to detach.

The ribbon cable will still be attached to the tape.

Step 8

  • Peel the tape that is on top of the trackpad.

Peel the tape that is on top of the trackpad.

Step 9

  • Lift the trackpad out of the Chromebook.

Lift the trackpad out of the Chromebook.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Ashley Oxner

Member since: 09/26/2017

677 Reputation

                                      3 Guides authored                  



                       Badges:
                       21







                                                        +18 more badges

Team

                       USF Tampa, Team S11-G1, Passmore Fall 2017                        

                                                  Member of USF Tampa, Team S11-G1, Passmore Fall 2017 



                    USFT-PASSMORE-F17S11G1                     


                                            3 Members                     


                                            10 Guides authored