Difficulty
Moderate
Steps
12
Time Required
Suggest a time??
Sections
8
- Back Panel
- 2 steps
- Disconnect Battery Prerequisite
- 1 step
- Disconnect WiFi Prerequisite
- 1 step
- Deroute WiFi Wires Prerequisite
- 2 steps
- Disconnect Display Cable Prerequisite
- 1 step
- Right Display Hinge Disconnect Prerequisite
- 2 steps
- Left Display Hinge Disconnect Prerequisite
- 2 steps
- Display Assembly
- 1 step
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackAcer Chromebook 15 cb3-532-c47c
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Power off the laptop before beginning the replacement.
- Using the Phillips #1 screwdriver, remove eighteen 7 mm screws from the back panel of the device.
Power off the laptop before beginning the replacement.
Using the Phillips #1 screwdriver, remove eighteen 7 mm screws from the back panel of the device.
1024
Step 2
- Use a plastic opening tool around the edges of the laptop and remove the back panel from the device.
Use a plastic opening tool around the edges of the laptop and remove the back panel from the device.
Step 3
Remove the battery cable
- Push on the sides of the connector with a plastic spudger to separate the cable from the motherboard.
Push on the sides of the connector with a plastic spudger to separate the cable from the motherboard.
Step 4
Unplug the WiFi Antenna Connectors
- Firmly pull the end of the black wire attached to the Wi-Fi card upwards and remove it from the device.
- Repeat with the white wire.
Firmly pull the end of the black wire attached to the Wi-Fi card upwards and remove it from the device.
Repeat with the white wire.
Step 5
Deroute the Black WiFi Wire
- Deroute the black wifi wire from its slot in the palm rest.
Deroute the black wifi wire from its slot in the palm rest.
Step 6
Deroute the White WiFi Wire
- Deroute the white wifi wire from the slot in the palm rest.
Deroute the white wifi wire from the slot in the palm rest.
Step 7
Disconnect the Display Cable
- Pull the end of the display cable attached to the motherboard straight up to remove.
- Rotate the cable out away from the motherboard.
Pull the end of the display cable attached to the motherboard straight up to remove.
Rotate the cable out away from the motherboard.
Step 8
Remove Right Hinge Screws
- Remove the two screws from the right hinge.
Remove the two screws from the right hinge.
Step 9
- Insert a screwdriver or spudger under the hinge to get it started then rotate it open by hand as far as possible.
Insert a screwdriver or spudger under the hinge to get it started then rotate it open by hand as far as possible.
Step 10
Remove Left Hinge Screws
- Remove the two screws from the left hinge.
Remove the two screws from the left hinge.
Step 11
Step 12
Remove the display assembly
- Lift the palm rest assembly from the front then slide it away from the hinges slightly to remove the assembly from the display.
Lift the palm rest assembly from the front then slide it away from the hinges slightly to remove the assembly from the display.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Jerry W
Member since: 03/21/2022
23,571 Reputation
50 Guides authored
Badges:
39
+36 more badges