Acer Chromebook Cb3 532 C47C Led Board Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

Suggest a time??

Sections

3

• Back Panel
• 2 steps
• Disconnect Battery Prerequisite
• 1 step
• LED Board
• 3 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackAcer Chromebook 15 cb3-532-c47c

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel               

• Power off the laptop before beginning the replacement.
• Using the Phillips #1 screwdriver, remove eighteen 7 mm screws from the back panel of the device.

Power off the laptop before beginning the replacement.

Using the Phillips #1 screwdriver, remove eighteen 7 mm screws from the back panel of the device.

1024

Step 2

• Use a plastic opening tool around the edges of the laptop and remove the back panel from the device.

Use a plastic opening tool around the edges of the laptop and remove the back panel from the device.

Step 3

              Remove the battery cable               

• Push on the sides of the connector with a plastic spudger to separate the cable from the motherboard.

Push on the sides of the connector with a plastic spudger to separate the cable from the motherboard.

Step 4

              Disconnect the LED board               

• Flip the retaining latch up with a spudger.

Flip the retaining latch up with a spudger.

Step 5

• Pull the cable straight out away from the front of the computer.

Pull the cable straight out away from the front of the computer.

Step 6

              Remove the LED board               

• Remove the single retaining screw securing the LED board.
• Remove the board.
• When reassembling, ensure the board is seated on the guide pin before reinstalling the retaining screw.

Remove the single retaining screw securing the LED board.

Remove the board.

When reassembling, ensure the board is seated on the guide pin before reinstalling the retaining screw.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Jerry W                     

Member since: 03/21/2022

23,571 Reputation

                                      50 Guides authored                  



                       Badges:
                       39







                                                        +36 more badges