Acer Chromebook Cb3 532 C47C Wifi Card Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

Suggest a time??

Sections

4

• Back Panel
• 2 steps
• Disconnect Battery Prerequisite
• 1 step
• Disconnect WiFi Prerequisite
• 1 step
• WiFi Card
• 1 step

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackAcer Chromebook 15 cb3-532-c47c

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Step 1

              Back Panel               

• Power off the laptop before beginning the replacement.
• Using the Phillips #1 screwdriver, remove eighteen 7 mm screws from the back panel of the device.

Power off the laptop before beginning the replacement.

Using the Phillips #1 screwdriver, remove eighteen 7 mm screws from the back panel of the device.

1024

Step 2

• Use a plastic opening tool around the edges of the laptop and remove the back panel from the device.

Use a plastic opening tool around the edges of the laptop and remove the back panel from the device.

Step 3

              Remove the battery cable               

• Push on the sides of the connector with a plastic spudger to separate the cable from the motherboard.

Push on the sides of the connector with a plastic spudger to separate the cable from the motherboard.

Step 4

              Unplug the WiFi Antenna Connectors               

• Firmly pull the end of the black wire attached to the Wi-Fi card upwards and remove it from the device.
• Repeat with the white wire.

Firmly pull the end of the black wire attached to the Wi-Fi card upwards and remove it from the device.

Repeat with the white wire.

Step 5

              WiFi Card               

• Using the Phillips #0 screwdriver, remove the single 6 mm screw securing the Wi-Fi card.
• Pull the Wi-Fi card straight out of the motherboard and remove it from the device.

Using the Phillips #0 screwdriver, remove the single 6 mm screw securing the Wi-Fi card.

Pull the Wi-Fi card straight out of the motherboard and remove it from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Jerry W                     

Member since: 03/21/2022

23,571 Reputation

                                      50 Guides authored                  



                       Badges:
                       39







                                                        +36 more badges