Acer Chromebook Cb5 132T C8Zw Usb Port Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          2 minutes            

Sections

2

• Battery
• 4 steps
• USB Port
• 3 steps

Flags

0

• BackAcer Chromebook CB5-132T-C8ZW

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Remove eleven 7.2 mm screws from the bottom of the Chromebook using a JIS #1 screwdriver.

Remove eleven 7.2 mm screws from the bottom of the Chromebook using a JIS #1 screwdriver.

1024

Step 2

• Insert and slightly twist a plastic opening tool to separate and remove the backing of the Chromebook from the body.
• Do not immediately remove the back from the laptop. The power strip keeps the backing attached to the rest of the laptop. Gently lift backing from the power button side and set next to the body of the laptop.

Insert and slightly twist a plastic opening tool to separate and remove the backing of the Chromebook from the body.

Do not immediately remove the back from the laptop. The power strip keeps the backing attached to the rest of the laptop. Gently lift backing from the power button side and set next to the body of the laptop.

Step 3

• Remove two 4.6 mm JIS # screws at each end of the battery.

Remove two 4.6 mm JIS # screws at each end of the battery.

Step 4

• Carefully pull out the ribbon cable attached to the motherboard that runs wires to the battery.
• Remove the battery.

Carefully pull out the ribbon cable attached to the motherboard that runs wires to the battery.

Remove the battery.

Step 5

              USB Port               

• From the back panel, remove one 3.4 mm JIS #1 screw.

From the back panel, remove one 3.4 mm JIS #1 screw.

Step 6

• Remove the white connector strip using your fingers.

Remove the white connector strip using your fingers.

Step 7

• Lift the USB port up using a spudger.
• Remove the USB port with your fingers.

Lift the USB port up using a spudger.

Remove the USB port with your fingers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Lauren Reichenbach                     

Member since: 01/13/2020

580 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Eastern Washington University, Team S1-G2, Carnegie Winter 2020                        

                                                  Member of Eastern Washington University, Team S1-G2, Carnegie Winter 2020 



                    EWU-CARNEGIE-W20S1G2                     


                                            3 Members                     


                                            4 Guides authored