Difficulty
Easy
Steps
5
Time Required
                          5 - 10 minutes            
Sections
2
- Bottom Panel
- 2 steps
- Battery
- 3 steps
Flags
0
- BackAcer Chromebook R11 CB5-132T-C1LK 
- Full Screen 
- Options 
- History 
- Save to Favorites 
- Download PDF 
- Edit 
- Translate 
- Get Shareable Link 
- Embed This Guide 
- Notify Me of Changes 
- Stop Notifications 
Introduction
What you need
Step 1
              Bottom Panel               
- Using a Phillips screwdriver, remove all eleven 7.0 mm screws from the bottom of the Chromebook.
Using a Phillips screwdriver, remove all eleven 7.0 mm screws from the bottom of the Chromebook.
1024
Step 2
- Find the seam along the edge of the device.
- Wedge a finger into the groove and separate the panel from the device. If necessary, use a spudger.
- The panel will still be connected to the device by internal wiring, so pull it off with some caution. It is best to flip the panel to the side once the seam has been broken.
Find the seam along the edge of the device.
Wedge a finger into the groove and separate the panel from the device. If necessary, use a spudger.
The panel will still be connected to the device by internal wiring, so pull it off with some caution. It is best to flip the panel to the side once the seam has been broken.
Step 3
              Battery               
- Remove the two 4.5 mm Phillips screws located at the sides of the battery.
Remove the two 4.5 mm Phillips screws located at the sides of the battery.
Step 4
- Grip the battery connection using two plastic opening tools.
- Carefully but firmly, pry the connector from its socket by pulling it towards the battery.
- When reconnecting the battery to the motherboard, place the red wires closer to the edge of the device and the black wires towards the center.
Grip the battery connection using two plastic opening tools.
Carefully but firmly, pry the connector from its socket by pulling it towards the battery.
When reconnecting the battery to the motherboard, place the red wires closer to the edge of the device and the black wires towards the center.
Step 5
- Lift the battery out by pulling upward.
Lift the battery out by pulling upward.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
                                                                                      3 other people completed this guide.                                             
Author
                                      with 4 other contributors 
                    Alan Shan                     
Member since: 04/26/2017
385 Reputation
                                      3 Guides authored                  
                       Badges:
                       10
                                                        +7 more badges                           
Team
                       Cal Poly, Team S23-G2, Livingston Spring 2017                        
                                                  Member of Cal Poly, Team S23-G2, Livingston Spring 2017 
                    CPSU-LIVINGSTON-S17S23G2                     
                                            4 Members                     
                                            12 Guides authored