Acer Chromebook R11 Cb5 132T C1Lk Led Boardreplacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          5 - 10 minutes            

Sections

2

• Bottom Panel
• 2 steps
• LED Board
• 3 steps

Flags

0

• BackAcer Chromebook R11 CB5-132T-C1LK

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Bottom Panel               

• Using a Phillips screwdriver, remove all eleven 7.0 mm screws from the bottom of the Chromebook.

Using a Phillips screwdriver, remove all eleven 7.0 mm screws from the bottom of the Chromebook.

1024

Step 2

• Find the seam along the edge of the device.
• Wedge a finger into the groove and separate the panel from the device. If necessary, use a spudger.
• The panel will still be connected to the device by internal wiring, so pull it off with some caution. It is best to flip the panel to the side once the seam has been broken.

Find the seam along the edge of the device.

Wedge a finger into the groove and separate the panel from the device. If necessary, use a spudger.

The panel will still be connected to the device by internal wiring, so pull it off with some caution. It is best to flip the panel to the side once the seam has been broken.

Step 3

              LED Board               

• Use the flat end of the spudger to lift the retaining flap on the LED board ZIF connector.
• Pull the ribbon cable from the ZIF connector using tweezers.

Use the flat end of the spudger to lift the retaining flap on the LED board ZIF connector.

Pull the ribbon cable from the ZIF connector using tweezers.

Step 4

• Remove the 4.5 mm Phillips screw.
• There is a magnet near the LED chip that might attract the screw.

Remove the 4.5 mm Phillips screw.

There is a magnet near the LED chip that might attract the screw.

Step 5

• Use tweezers to remove the LED board.

Use tweezers to remove the LED board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Alan Shan                     

Member since: 04/26/2017

385 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Cal Poly, Team S23-G2, Livingston Spring 2017                        

                                                  Member of Cal Poly, Team S23-G2, Livingston Spring 2017 



                    CPSU-LIVINGSTON-S17S23G2                     


                                            4 Members                     


                                            12 Guides authored