Difficulty

Easy

Steps

7

Time Required

                          6 - 10 minutes            

Sections

2

  • Battery
  • 4 steps
  • Track Pad
  • 3 steps

Flags

0

  • BackAcer Chromebook Spin 11 R751TN-C5P3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery               
  • Flip the Chromebook face down.
  • Use a Phillips #0 screwdriver to remove the twelve 6 mm screws that secure the bottom cover.

Flip the Chromebook face down.

Use a Phillips #0 screwdriver to remove the twelve 6 mm screws that secure the bottom cover.

1024

Step 2

  • Insert an opening tool in the seam between the outer covers. Pushing down on the edge of the opening tool will cause the cover to lift up and reveal the internal components.

Insert an opening tool in the seam between the outer covers. Pushing down on the edge of the opening tool will cause the cover to lift up and reveal the internal components.

Step 3

  • Grab the connecting cord between the battery and the motherboard and pull towards you to disconnect.
  • Remove any tape holding the battery cord down by pulling up on it.

Grab the connecting cord between the battery and the motherboard and pull towards you to disconnect.

Remove any tape holding the battery cord down by pulling up on it.

Step 4

  • The battery is no longer connected to the Chromebook allowing you to lift up and remove the battery.

The battery is no longer connected to the Chromebook allowing you to lift up and remove the battery.

Step 5

              Track Pad               
  • Pull the tape back and unplug the cable connecting the track pad to the motherboard by gently pulling back on it.

Pull the tape back and unplug the cable connecting the track pad to the motherboard by gently pulling back on it.

Step 6

  • Use a Phillips #0 screwdriver to remove the four 3 mm screws that secure the track pad in place.
  • 3 of the screws are located below the black film that must be lifted up to expose them.

Use a Phillips #0 screwdriver to remove the four 3 mm screws that secure the track pad in place.

3 of the screws are located below the black film that must be lifted up to expose them.

Step 7

  • Lift up on the track pad to remove it out of the Chromebook.

Lift up on the track pad to remove it out of the Chromebook.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Bailey Johnson                     

Member since: 03/21/2022

691 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       University of Alabama, Team 2-3, Bedsole Spring 2022                        

                                                  Member of University of Alabama, Team 2-3, Bedsole Spring 2022 



                    UA-BEDSOLE-S22S2G3                     


                                            3 Members                     


                                            5 Guides authored