Difficulty

Difficult

Steps

5

Time Required

                          20 minutes            

Sections

2

  • Back Cover
  • 2 steps
  • Display Screen
  • 3 steps

Flags

0

  • BackAcer Chromebook Spin 15 CP315-1H-P1K8

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover               
  • Make sure the device is fully powered off.
  • Flip the computer over so that the back is facing up.
  • Remove the twelve 6mm Phillips #1 screws from the bottom of the laptop.

Make sure the device is fully powered off.

Flip the computer over so that the back is facing up.

Remove the twelve 6mm Phillips #1 screws from the bottom of the laptop.

1024

Step 2

  • Use the iFixit opening tools as wedges to pry the back of the laptop off.
  • Go slow, making sure not to snap the plastic. With enough of a gap made, you can use your hand to finish taking off the back.

Use the iFixit opening tools as wedges to pry the back of the laptop off.

Go slow, making sure not to snap the plastic. With enough of a gap made, you can use your hand to finish taking off the back.

Step 3

              Display Screen               
  • Remove the five 6mm Phillips #1 screws from the hinges on either side of the laptop.

Remove the five 6mm Phillips #1 screws from the hinges on either side of the laptop.

Step 4

  • Unplug the camera/microphone ribbon cable from the circuit board.
  • Remove the single 3mm Phillips #1 screw from the Intel core.
  • Unplug the cable from the circuit board.

Unplug the camera/microphone ribbon cable from the circuit board.

Remove the single 3mm Phillips #1 screw from the Intel core.

Unplug the cable from the circuit board.

Step 5

  • Use the plastic opening tool, create a gap between the back and front of the display.
  • Lift the front out with your hands.

Use the plastic opening tool, create a gap between the back and front of the display.

Lift the front out with your hands.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Evan Costa                     

Member since: 10/29/2019

503 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       UMass Dartmouth, Team S4-G1, Saloman Fall 2019                        

                                                  Member of UMass Dartmouth, Team S4-G1, Saloman Fall 2019 



                    UMASSD-SALOMAN-F19S4G1                     


                                            3 Members                     


                                            5 Guides authored                     

Christopher Rayment - Dec 25, 2020

Reply

I just want to say that I’ve used this guide several times. My kid dropped the laptop and broke the hinge which is located inside the top cover behind the LCD panel. When this happened, it caused the grommets to come out of the plastic. But for about $45 we replaced the hinge and the top cover and I was able to fix it and put it all back together. I appreciate having this guide to remind me. Thank you!

Wendy Brooks - Jan 3, 2021

Reply

Thank you so much for these instructions! The connections were the hardest part for me and the pictures were a great help.