Difficulty

Difficult

Steps

7

Time Required

                          15 minutes

Sections

3

  • Back Cover
  • 2 steps
  • Battery
  • 2 steps
  • Touchpad
  • 3 steps

Flags

0

  • BackAcer Chromebook Spin 15 CP315-1H-P1K8

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Make sure the device is fully powered off.
  • Flip the computer over so that the back is facing up.
  • Remove the twelve 6mm Phillips #1 screws from the bottom of the laptop.

Make sure the device is fully powered off.

Flip the computer over so that the back is facing up.

Remove the twelve 6mm Phillips #1 screws from the bottom of the laptop.

1024

Step 2

  • Use the iFixit opening tools as wedges to pry the back of the laptop off.
  • Go slow, making sure not to snap the plastic. With enough of a gap made, you can use your hand to finish taking off the back.

Use the iFixit opening tools as wedges to pry the back of the laptop off.

Go slow, making sure not to snap the plastic. With enough of a gap made, you can use your hand to finish taking off the back.

Step 3

              Battery
  • Remove the ribbon cable by pulling the plastic connector that is connected to the motherboard out.

Remove the ribbon cable by pulling the plastic connector that is connected to the motherboard out.

Step 4

  • Remove the battery from the laptop by hand.

Remove the battery from the laptop by hand.

Step 5

              Touchpad
  • Detach the ribbon cable from the touchpad.

Detach the ribbon cable from the touchpad.

Step 6

  • Remove the tan adhesive tape that is covering the touchpad to expose the screws holding it in.
  • Remove the three, 3mm long screws that are holding the touchpad in place.

Remove the tan adhesive tape that is covering the touchpad to expose the screws holding it in.

Remove the three, 3mm long screws that are holding the touchpad in place.

Step 7

  • Gently push the touchpad out with your hand.

Gently push the touchpad out with your hand.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Evan Costa

Member since: 10/29/2019

503 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       UMass Dartmouth, Team S4-G1, Saloman Fall 2019                        

                                                  Member of UMass Dartmouth, Team S4-G1, Saloman Fall 2019 



                    UMASSD-SALOMAN-F19S4G1                     


                                            3 Members                     


                                            5 Guides authored