Acer Iconia A1 810 Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          5 - 10 minutes            

Sections

2

• Battery
• 4 steps
• Motherboard
• 5 steps

Flags

5

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Missed a Step

Oops! This guide is currently missing some important steps.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackAcer Iconia A1-810

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Remove the back cover by lifting with a plastic opening tool, below the camera button slot.

Remove the back cover by lifting with a plastic opening tool, below the camera button slot.

1024

Step 2

• Remove the black tape connecting the battery to the motherboard.

Remove the black tape connecting the battery to the motherboard.

Step 3

• Pinch the sides of the white resistor to safely remove it without damaging it or yourself.

Pinch the sides of the white resistor to safely remove it without damaging it or yourself.

Step 4

• Remove battery from adhesive.

Remove battery from adhesive.

Step 5

              Motherboard               

• Use a Phillips #000 screwdriver to remove the screws around the perimeter of the motherboard.

Use a Phillips #000 screwdriver to remove the screws around the perimeter of the motherboard.

Step 6

• Disconnect the resistor attached to the orange tab by sliding the tail out.
• Pry open the orange tab near the top left corner.

Disconnect the resistor attached to the orange tab by sliding the tail out.

Pry open the orange tab near the top left corner.

Step 7

• Disconnect all cords, wires, and resistors from the motherboard using tweezers.

Disconnect all cords, wires, and resistors from the motherboard using tweezers.

Step 8

• Continue to disconnect all resistors attached from the motherboard, using tweezers.

Continue to disconnect all resistors attached from the motherboard, using tweezers.

Step 9

• Gently lift motherboard out.
• The edges may be sharp.

Gently lift motherboard out.

The edges may be sharp.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    John                     

Member since: 01/29/2015

588 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       UWT Liner: Group 3                        

                                                  Member of UWT Liner: Group 3 



                    Community                     


                                            5 Members                     


                                            3 Guides authored                     

mehwish - May 31, 2016

Reply

I need main ic part num A1-810 iconia I need main ic

It was damage because high voltage

I need main ic

theblackfox2 - Jul 11, 2016

Reply

Can you replace the mini USB charger port without replacing entire motherboard and losing data?

Muhammad - May 31, 2017

Reply

Hi there i need acer lconia A3 main bord how much it will cost me ?