Difficulty
Moderate
Steps
8
Time Required
Suggest a time??
Sections
3
- Disassembling Acer Iconia A1-830 Back Panel
- 2 steps
- Battery
- 3 steps
- Front Facing Camera
- 3 steps
Flags
2
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackAcer Iconia A1-830
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Disassembling Acer Iconia A1-830 Back Panel
- Prepare your working space. The ideal work space has a flat, level surface that is clean and well lit.
- Shut down your Acer Iconia A1-830.
- Remove any cables or exterior covers from your tablet.
- Place it on your work space, with the screen facing up.
Prepare your working space. The ideal work space has a flat, level surface that is clean and well lit.
Shut down your Acer Iconia A1-830.
Remove any cables or exterior covers from your tablet.
Place it on your work space, with the screen facing up.
1024
Step 2
- Wedge the plastic opening tool into the tiny gap between the white plastic front bezel and the aluminum rear panel.
- Do not try to pry apart the top edge on the front side near the front-facing camera.
Wedge the plastic opening tool into the tiny gap between the white plastic front bezel and the aluminum rear panel.
Do not try to pry apart the top edge on the front side near the front-facing camera.
Step 3
Battery
- Remove the small clear plastic cover on top of the battery cable with the nylon or metal spudger.
Remove the small clear plastic cover on top of the battery cable with the nylon or metal spudger.
Step 4
- Remove the battery cable by lifting it up with the pointy end of the black nylon spudger.
Remove the battery cable by lifting it up with the pointy end of the black nylon spudger.
Step 5
- Un-stick the battery from the metal plate using the black nylon spudger.
- Be careful not to puncture the battery while removing it.
Un-stick the battery from the metal plate using the black nylon spudger.
Be careful not to puncture the battery while removing it.
Step 6
Front Facing Camera
- Peel off the piece of black tape covering the front facing camera ribbon cable.
- Do this by holding down the ribbon cable and peeling off the tape with the metal tweezers.
Peel off the piece of black tape covering the front facing camera ribbon cable.
Do this by holding down the ribbon cable and peeling off the tape with the metal tweezers.
Step 7
- Peel off the piece of black tape covering the front facing camera ribbon cable connector.
Peel off the piece of black tape covering the front facing camera ribbon cable connector.
Step 8
- Lift up the small white lever to release the ribbon cable.
- Pull out the ribbon cable from the connector with the metal tweezers.
- Lift out the front facing camera from the plastic frame.
Lift up the small white lever to release the ribbon cable.
Pull out the ribbon cable from the connector with the metal tweezers.
Lift out the front facing camera from the plastic frame.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Brendan Coveney
Member since: 10/18/2015
587 Reputation
3 Guides authored
Badges:
10
+7 more badges
Team
UMass Dartmouth, Team 4-6, Catania Fall 2015
Member of UMass Dartmouth, Team 4-6, Catania Fall 2015
UMASSD-CATANIA-F15S4G6
3 Members
5 Guides authored