Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

3

  • Disassembling Acer Iconia A1-830 Back Panel
  • 2 steps
  • Battery
  • 3 steps
  • Rear Facing Camera
  • 2 steps

Flags

2

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackAcer Iconia A1-830

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disassembling Acer Iconia A1-830 Back Panel
  • Prepare your working space. The ideal work space has a flat, level surface that is clean and well lit.
  • Shut down your Acer Iconia A1-830.
  • Remove any cables or exterior covers from your tablet.
  • Place it on your work space, with the screen facing up.

Prepare your working space. The ideal work space has a flat, level surface that is clean and well lit.

Shut down your Acer Iconia A1-830.

Remove any cables or exterior covers from your tablet.

Place it on your work space, with the screen facing up.

1024

Step 2

  • Wedge the plastic opening tool into the tiny gap between the white plastic front bezel and the aluminum rear panel.
  • Do not try to pry apart the top edge on the front side near the front-facing camera.

Wedge the plastic opening tool into the tiny gap between the white plastic front bezel and the aluminum rear panel.

Do not try to pry apart the top edge on the front side near the front-facing camera.

Step 3

              Battery
  • Remove the small clear plastic cover on top of the battery cable with the nylon or metal spudger.

Remove the small clear plastic cover on top of the battery cable with the nylon or metal spudger.

Step 4

  • Remove the battery cable by lifting it up with the pointy end of the black nylon spudger.

Remove the battery cable by lifting it up with the pointy end of the black nylon spudger.

Step 5

  • Un-stick the battery from the metal plate using the black nylon spudger.
  • Be careful not to puncture the battery while removing it.

Un-stick the battery from the metal plate using the black nylon spudger.

Be careful not to puncture the battery while removing it.

Step 6

              Rear Facing Camera
  • Remove the piece of black tape covering the rear facing camera ribbon cable connector.

Remove the piece of black tape covering the rear facing camera ribbon cable connector.

Step 7

  • Lift up the small white lever on the the ribbon cable connector with the metal tweezers to remove the ribbon cable.
  • Lift out the rear facing camera from the plastic frame with the metal tweezers.

Lift up the small white lever on the the ribbon cable connector with the metal tweezers to remove the ribbon cable.

Lift out the rear facing camera from the plastic frame with the metal tweezers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Brendan Coveney

Member since: 10/18/2015

587 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       UMass Dartmouth, Team 4-6, Catania Fall 2015                        

                                                  Member of UMass Dartmouth, Team 4-6, Catania Fall 2015 



                    UMASSD-CATANIA-F15S4G6                     


                                            3 Members                     


                                            5 Guides authored