Difficulty
Difficult
Steps
14
Time Required
30 minutes - 1 hour
Sections
2
- Battery
- 3 steps
- Screen
- 11 steps
Flags
1
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackAcer Iconia B1-710
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Open the back cover by prying the casing off with an opening tool.
- Be careful to not pull pieces apart aggressively. There is a wire that could break.
Open the back cover by prying the casing off with an opening tool.
Be careful to not pull pieces apart aggressively. There is a wire that could break.
1024
Step 2
- Unplug the battery from the motherboard.
Unplug the battery from the motherboard.
Step 3
- Remove the battery.
- The battery is lightly glued in, so there may be some difficulty getting it out.
Remove the battery.
The battery is lightly glued in, so there may be some difficulty getting it out.
Step 4
Screen
- Unscrew all five 3 mm #000 Phillips screws.
Unscrew all five 3 mm #000 Phillips screws.
Step 5
- Unplug the LCD ribbon.
Unplug the LCD ribbon.
Step 6
- Unplug the orange ribbon.
Unplug the orange ribbon.
Step 7
- Unplug the white wire from the motherboard.
- Unplug the black wire from the motherboard.
Unplug the white wire from the motherboard.
Unplug the black wire from the motherboard.
Step 8
- Pull the motherboard off of the tablet.
Pull the motherboard off of the tablet.
Step 9
- Use a blow dryer to melt the glue holding the LCD display in place.
- Patience is key. It will take a few minutes to melt the glue.
Use a blow dryer to melt the glue holding the LCD display in place.
Patience is key. It will take a few minutes to melt the glue.
Step 10
- Peel the LCD display.
- This piece is fragile and needs to be peeled with care.
- Parts may be hot.
Peel the LCD display.
This piece is fragile and needs to be peeled with care.
Parts may be hot.
Step 11
- Use a blow dryer to melt the glue from the thin metal frame.
- This piece is metal and will become hot during this process.
Use a blow dryer to melt the glue from the thin metal frame.
This piece is metal and will become hot during this process.
Step 12
- Peel off the thin metal frame.
- Be careful not to bend the frame as it is very thin.
Peel off the thin metal frame.
Be careful not to bend the frame as it is very thin.
Step 13
- Use a blow dryer to melt the glue between the metal frame and the screen.
- The frame will get hot.
Use a blow dryer to melt the glue between the metal frame and the screen.
The frame will get hot.
Step 14
- Peel the frame from the screen.
- Be careful when peeling the screen or it may sustain further damage.
Peel the frame from the screen.
Be careful when peeling the screen or it may sustain further damage.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 8 other contributors
Ryan Weber
Member since: 03/26/2017
358 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
IUPUI, Team S3-G5, Baechle Spring 2017
Member of IUPUI, Team S3-G5, Baechle Spring 2017
IUPUI-BAECHLE-S17S3G5
4 Members
3 Guides authored
