Acer Iconia B1 710 Tablet Camera Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          10 - 15 minutes            

Sections

2

• Battery
• 3 steps
• Camera
• 6 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

• BackAcer Iconia B1-710

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

In the event that your camera scratches, breaks, or malfunctions, this guide can help assist you to remove and replace the camera on your Acer Iconia B1-710 tablet.

Be careful, this is a fragile device.

What you need

Step 1

              Battery               

• Open the back cover by prying the casing off with an opening tool.
• Be careful to not pull pieces apart aggressively. There is a wire that could break.

Open the back cover by prying the casing off with an opening tool.

Be careful to not pull pieces apart aggressively. There is a wire that could break.

1024

Step 2

• Unplug the battery from the motherboard.

Unplug the battery from the motherboard.

Step 3

• Remove the battery.
• The battery is lightly glued in, so there may be some difficulty getting it out.

Remove the battery.

The battery is lightly glued in, so there may be some difficulty getting it out.

Step 4

              Camera               

• Remove the five 3mm Phillips #000 screws. The location of the screws are shown in the above picture, circled in red.
• Keep the removed screws in a safe place so they can be used later.

Remove the five 3mm Phillips #000 screws. The location of the screws are shown in the above picture, circled in red.

Keep the removed screws in a safe place so they can be used later.

Step 5

• Unplug the LCD by lifting the LCD plug from the white board. The location of the LCD plug is shown in the above picture, circled in red.
• If you are having difficulty removing the LCD plug, use a spudger to gently lift it.

Unplug the LCD by lifting the LCD plug from the white board. The location of the LCD plug is shown in the above picture, circled in red.

If you are having difficulty removing the LCD plug, use a spudger to gently lift it.

Step 6

• Next, unplug the orange strip from the motherboard by gently lifting it. The location of the orange strip is shown in the above picture, circled in red.
• The orange strip is delicate; be careful when unplugging it and make sure it doesn’t tear.

Next, unplug the orange strip from the motherboard by gently lifting it. The location of the orange strip is shown in the above picture, circled in red.

The orange strip is delicate; be careful when unplugging it and make sure it doesn’t tear.

Step 7

• Unplug the white wire, shown above, circled in red.
• Unplug the black wire, shown above, circled in orange.

Unplug the white wire, shown above, circled in red.

Unplug the black wire, shown above, circled in orange.

Step 8

• Gently, remove the motherboard by carefully lifting it.

Gently, remove the motherboard by carefully lifting it.

Step 9

• Remove the camera from the motherboard with the spudger.
• Be careful not to damage the camera plug; it is very delicate.

Remove the camera from the motherboard with the spudger.

Be careful not to damage the camera plug; it is very delicate.

To reassemble your device, follow the above instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 7 other contributors 

                    Ryan Weber                     

Member since: 03/26/2017

358 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       IUPUI, Team S3-G5, Baechle Spring 2017                        

                                                  Member of IUPUI, Team S3-G5, Baechle Spring 2017 



                    IUPUI-BAECHLE-S17S3G5                     


                                            4 Members                     


                                            3 Guides authored