Acer Iconia B1 720 Microphone Speaker Replacement Repair Guide

Difficulty

Very easy

Steps

6

Time Required

                          1 - 5 minutes            

Sections

2

• Rear Case
• 3 steps
• Microphone/Speaker
• 3 steps

Flags

0

• BackAcer Iconia B1-720

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Case               

• Insert a plastic opening tool into a gap near the charging port at the top of the device. Slide the tool in either direction along the device.

Insert a plastic opening tool into a gap near the charging port at the top of the device. Slide the tool in either direction along the device.

1024

Step 2

• Slide the tool along until you have completely separated the rear cover.
• If needed, place the first tool in the gap created to hold this gap open and use a second tool to pry the remaining portion of the rear cover off.

Slide the tool along until you have completely separated the rear cover.

If needed, place the first tool in the gap created to hold this gap open and use a second tool to pry the remaining portion of the rear cover off.

Step 3

• Once all the sides have been separated, you should be able to simply lift the cover off of the device.

Once all the sides have been separated, you should be able to simply lift the cover off of the device.

Step 4

              Microphone/Speaker               

• Pry the speaker away from the device using the plastic opening tool. This may require a little force due to the adhesive that is on the device.(Battery is not shown in this picture for image
• Tug gently on microphone to remove from slot.

Pry the speaker away from the device using the plastic opening tool. This may require a little force due to the adhesive that is on the device.(Battery is not shown in this picture for image

Tug gently on microphone to remove from slot.

Step 5

• Unwind the wire from the running channel.
• To remove microphone, follow same steps.

Unwind the wire from the running channel.

To remove microphone, follow same steps.

Step 6

• Unplug connector from motherboard.
• Follow same procedure to remove microphone.
• Unplug the microphone in a similar fashion as with the speaker.

Unplug connector from motherboard.

Follow same procedure to remove microphone.

Unplug the microphone in a similar fashion as with the speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Phillip Keavey                     

Member since: 03/17/2015

319 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Michigan Tech, Team 1-1, Lauer Spring 2015                        

                                                  Member of Michigan Tech, Team 1-1, Lauer Spring 2015 



                    MTU-LAUER-S15S1G1                     


                                            2 Members                     


                                            5 Guides authored