Acer Iconia B1 A71 Lcd Display Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          15 - 20 minutes            

Sections

1

• Acer Iconia B1-A71 LCD Display Replacement
• 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackAcer Iconia Tab B1-A71

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Please SUBSCRIBE to my channel ツ

What you need

Video Overview

Step 1

              Acer Iconia B1-A71 LCD Display Replacement               

• Switch-off the tablet.
• If you can’t switch it off, use the reset button to do this.
• With a cutter and a plastic tool remove the back cover.
• If you have a memory card inside, don’t forget to remove it!

Switch-off the tablet.

If you can’t switch it off, use the reset button to do this.

With a cutter and a plastic tool remove the back cover.

If you have a memory card inside, don’t forget to remove it!

1024

Step 2

• First, disconnect the battery.
• Now, disconnect the loudspeaker and remove the back cover.
• Remove all scotch tapes and disconnect the touch screen flex cable…
• LCD display flex cable,
• the microphone,
• and the WiFi and Bluetooth antennas flex cables.

First, disconnect the battery.

Now, disconnect the loudspeaker and remove the back cover.

Remove all scotch tapes and disconnect the touch screen flex cable…

LCD display flex cable,

the microphone,

and the WiFi and Bluetooth antennas flex cables.

Step 3

• Unscrew 5x screws and rmove the main board.

Unscrew 5x screws and rmove the main board.

Step 4

• The battery is glued to the LCD display metal shield with a double sided adhesive tape.
• Use plastic tools and carefully remove it.
• Remove all tapes from the LCD display metal shield.

The battery is glued to the LCD display metal shield with a double sided adhesive tape.

Use plastic tools and carefully remove it.

Remove all tapes from the LCD display metal shield.

Step 5

• The LCD display is held by metal frame and some locking clips on it.
• Use a cutter and a plastic tool to separate the LCD.
• You have to work slowly so as not to break the display.
• Now, install the new LCD display and reassemble the tablet.
• .
• Did you do it successfully?
• Please SUBSCRIBE to my channel ツ

The LCD display is held by metal frame and some locking clips on it.

Use a cutter and a plastic tool to separate the LCD.

You have to work slowly so as not to break the display.

Now, install the new LCD display and reassemble the tablet.

.

Did you do it successfully?

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.                                             

Author

                    ZFix                     

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges                           

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored