Difficulty
Easy
Steps
4
Time Required
1 - 3 minutes
Sections
1
- Camera
- 4 steps
Flags
0
BackAcer Iconia One 10 B3-A30
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Camera
- Make sure the device is powered off.
- Pry open media port cover at the top of the tablet.
- Use the Phillips 00 screwdriver to remove the 1 mm screw.
Make sure the device is powered off.
Pry open media port cover at the top of the tablet.
Use the Phillips 00 screwdriver to remove the 1 mm screw.
1024
Step 2
- Using the metal spudger, carefully pry open the back cover.
Using the metal spudger, carefully pry open the back cover.
Step 3
- Using the plastic opening tool gently place the tip of it under the connection and pry up. It will pop out.
Using the plastic opening tool gently place the tip of it under the connection and pry up. It will pop out.
Step 4
- Use the plastic opening tool to pry up the rear facing camera. Once removed the front facing camera will come out as well.
Use the plastic opening tool to pry up the rear facing camera. Once removed the front facing camera will come out as well.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Austin Pickart
Member since: 09/28/2017
688 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team S1-G5, Nance Fall 2017
Member of USF Tampa, Team S1-G5, Nance Fall 2017
USFT-NANCE-F17S1G5
4 Members
5 Guides authored
