Acer Iconia One 10 B3 A30 Repair Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 - 10 minutes

Sections

Battery
5 steps
Motherboard
4 steps
Screen
4 steps

Flags

BackAcer Iconia One 10 B3-A30
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Make sure the device is powered off.
Open media port cover at the top of the tablet.
Use the Phillips #00 screwdriver to remove the 1 mm screw.

Make sure the device is powered off.

Open media port cover at the top of the tablet.

Use the Phillips #00 screwdriver to remove the 1 mm screw.

1024

Step 2

Using the metal spudger, carefully pry open the back cover.

Using the metal spudger, carefully pry open the back cover.

Step 3

Remove small section of grey tape.

Remove small section of grey tape.

Step 4

Unplug the connection cord from the motherboard.

Unplug the connection cord from the motherboard.

Step 5

Try to remove the battery by pulling on the blue tabs.
If unsuccessful, use the black plastic spudger to gently break the glue bonds underneath and pull up to remove the battery.
Be very cautious not to puncture or bend the battery.

Try to remove the battery by pulling on the blue tabs.

If unsuccessful, use the black plastic spudger to gently break the glue bonds underneath and pull up to remove the battery.

Be very cautious not to puncture or bend the battery.

Step 6

              Motherboard

Remove all of the tape surrounding the motherboard.

Remove all of the tape surrounding the motherboard.

Step 7

Starting with the 2 large connections use the plastic opening tool to gently pry on the connections and pop them out.
Now, disconnect the two smaller black and red cords from the motherboard.

Starting with the 2 large connections use the plastic opening tool to gently pry on the connections and pop them out.

Now, disconnect the two smaller black and red cords from the motherboard.

Step 8

Scrape away the small square sticker to reveal one small screw. Use the Phillips #00 screwdriver to remove the screw.
Using the same screwdriver remove the other three screws on the motherboard.

Scrape away the small square sticker to reveal one small screw. Use the Phillips #00 screwdriver to remove the screw.

Using the same screwdriver remove the other three screws on the motherboard.

Step 9

Using the small plastic tool, carefully pry the motherboard out of the device.

Using the small plastic tool, carefully pry the motherboard out of the device.

Step 10

              Screen

Using a plastic spudger pry the square connection away from the screen.

Using a plastic spudger pry the square connection away from the screen.

Step 11

Using the Philips #00 head unscrew the screw holding in the small plate.

Using the Philips #00 head unscrew the screw holding in the small plate.

Step 12

Using the Philips #00 unscrew the remaining 4 screws along the two speakers.

Using the Philips #00 unscrew the remaining 4 screws along the two speakers.

Step 13

Using the plastic spudger gently pry the screen along the plastic clips.
Once at least 1/2 of the screen is unclipped slide it out of the frame using hands.

Using the plastic spudger gently pry the screen along the plastic clips.

Once at least 1/2 of the screen is unclipped slide it out of the frame using hands.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      14 other people completed this guide.

Author

                                      with 4 other contributors

                    Austin Pickart

Member since: 09/28/2017

688 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team S1-G5, Nance Fall 2017                        

                                                  Member of USF Tampa, Team S1-G5, Nance Fall 2017 



                    USFT-NANCE-F17S1G5                     


                                            4 Members                     


                                            5 Guides authored

Johnathon Ferland - Nov 7, 2017

nice job people!

marmaesker - Apr 27, 2018

It worked! I’m very happy

Linh Pham - Jun 1, 2018

nice job

Linh Pham

feje75 - Jun 26, 2018

This helped out a lot, thanks

Chris Wilson - Aug 20, 2018

Fantastic set of instructions. Very much appreciated. Cheers very much!!

Introduction#

What you need#

Team#

Introduction

What you need

Team