Difficulty

Moderate

Steps

5

Time Required

                          10 minutes            

Sections

1

  • Speaker
  • 5 steps

Flags

0

  • BackAcer Iconia One 7

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speaker               
  • Begin at any side of the tablet.
  • With a plastic opening tool, begin taking apart the back cover from the tablet by working along the edges.
  • Prying the lid open can be difficult; use caution in order to safely remove.
  • Turn off device before this step.

Begin at any side of the tablet.

With a plastic opening tool, begin taking apart the back cover from the tablet by working along the edges.

Prying the lid open can be difficult; use caution in order to safely remove.

Turn off device before this step.

1024

Step 2

  • Using a plastic opening tool, separate the back cover from the main device.
  • Open each side continuously to ensure all sides have been separated.

Using a plastic opening tool, separate the back cover from the main device.

Open each side continuously to ensure all sides have been separated.

Step 3

  • Turn the tablet over to locate the speaker.
  • Besides the parts that are mentioned in the instruction, try not to agitate other fragile components inside the device.
  • The speaker is on the bottom of the inside.

Turn the tablet over to locate the speaker.

Besides the parts that are mentioned in the instruction, try not to agitate other fragile components inside the device.

The speaker is on the bottom of the inside.

Step 4

  • Peel back tape.
  • Using tweezers, detach connection from motherboard.

Peel back tape.

Using tweezers, detach connection from motherboard.

Step 5

  • Unscrew screws with a JIS screwdriver with a #00 screw bit.
  • Dislodge the speaker unit.
  • Take care not to displace any other bits in the device.

Unscrew screws with a JIS screwdriver with a #00 screw bit.

Dislodge the speaker unit.

Take care not to displace any other bits in the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 

                    Michael                     

Member since: 09/03/2015

519 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       USF Tampa, Team 8-5, Eyestone Fall 2015                        

                                                  Member of USF Tampa, Team 8-5, Eyestone Fall 2015 



                    USFT-EYESTONE-F15S8G5                     


                                            3 Members                     


                                            5 Guides authored