Difficulty

Moderate

Steps

11

Time Required

                          20 minutes

Sections

3

  • Screen
  • 5 steps
  • Motherboard
  • 5 steps
  • Front Camera
  • 1 step

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

  • BackAcer Iconia One 8

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Begin by opening the back panel.
  • Wedge a plastic opening tool in between the front and back shell and gently separate.

Begin by opening the back panel.

Wedge a plastic opening tool in between the front and back shell and gently separate.

1024

Step 2

  • Peel back all pieces of tape indicated in picture.
  • There are three pieces of tape total (2 Black and 1 Silver).

Peel back all pieces of tape indicated in picture.

There are three pieces of tape total (2 Black and 1 Silver).

Step 3

  • Disconnect all cables from the device.
  • There should be 5 total.

Disconnect all cables from the device.

There should be 5 total.

Step 4

  • Remove the nine 3mm screws using the Phillips #000 screwdriver.

Remove the nine 3mm screws using the Phillips #000 screwdriver.

Step 5

  • Remove and separate the back plating (top) from the glass screen (bottom).

Remove and separate the back plating (top) from the glass screen (bottom).

Step 6

              Motherboard
  • Disconnect the metal tabs connecting the battery to the motherboard frame.

Disconnect the metal tabs connecting the battery to the motherboard frame.

Step 7

  • Disconnect the cable for the back camera.

Disconnect the cable for the back camera.

Step 8

  • Flip the metal plating to reveal the front camera.

Flip the metal plating to reveal the front camera.

Step 9

  • Use tweezers to carefully remove the front camera from the adhesive on the motherboard.

Use tweezers to carefully remove the front camera from the adhesive on the motherboard.

Step 10

  • Flip the device back over.
  • Remove the motherboard from the metallic frame by feeding the back camera and front camera cable through the port.
  • Remove the front camera from the device.

Flip the device back over.

Remove the motherboard from the metallic frame by feeding the back camera and front camera cable through the port.

Remove the front camera from the device.

Step 11

              Front Camera
  • Separate the front-facing camera from the back camera.
  • The two cameras are connected by glue and can be pulled apart.

Separate the front-facing camera from the back camera.

The two cameras are connected by glue and can be pulled apart.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Dustin Newland

Member since: 11/06/2019

343 Reputation

                                      3 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       IUPUI, Team S1-G2, Stella Fall 2019                        

                                                  Member of IUPUI, Team S1-G2, Stella Fall 2019 



                    IUPUI-STELLA-F19S1G2                     


                                            3 Members                     


                                            3 Guides authored