Difficulty
Moderate
Steps
5
Time Required
10 minutes
Sections
1
- Screen
- 5 steps
Flags
2
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackAcer Iconia One 8
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen
- Begin by opening the back panel.
- Wedge a plastic opening tool in between the front and back shell and gently separate.
Begin by opening the back panel.
Wedge a plastic opening tool in between the front and back shell and gently separate.
1024
Step 2
- Peel back all pieces of tape indicated in picture.
- There are three pieces of tape total (2 Black and 1 Silver).
Peel back all pieces of tape indicated in picture.
There are three pieces of tape total (2 Black and 1 Silver).
Step 3
- Disconnect all cables from the device.
- There should be 5 total.
Disconnect all cables from the device.
There should be 5 total.
Step 4
- Remove the nine 3mm screws using the Phillips #000 screwdriver.
Remove the nine 3mm screws using the Phillips #000 screwdriver.
Step 5
- Remove and separate the back plating (top) from the glass screen (bottom).
Remove and separate the back plating (top) from the glass screen (bottom).
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Dustin Newland
Member since: 11/06/2019
343 Reputation
3 Guides authored
Badges:
4
+1 more badge
Team
IUPUI, Team S1-G2, Stella Fall 2019
Member of IUPUI, Team S1-G2, Stella Fall 2019
IUPUI-STELLA-F19S1G2
3 Members
3 Guides authored