Difficulty
Moderate
Steps
5
Time Required
20 minutes
Sections
2
- Back Panel
- 3 steps
- Rear Camera
- 2 steps
Flags
0
BackAcer Iconia Tab 8 A1-840
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Power off the device
- Remove any cables that might be connected to your device
- Make sure the device is placed on a flat surface with the display screen facing up
Power off the device
Remove any cables that might be connected to your device
Make sure the device is placed on a flat surface with the display screen facing up
1024
Step 2
- Wedge the plastic opening tool in between the display screen and back panel
- Do not apply too much pressure in order to avoid cracking the screen
Wedge the plastic opening tool in between the display screen and back panel
Do not apply too much pressure in order to avoid cracking the screen
Step 3
- Carefully separate the display from the back panel
Carefully separate the display from the back panel
Step 4
Rear Camera
- Use the flat end of the spudger to gently open the black flap.
Use the flat end of the spudger to gently open the black flap.
Step 5
- Use the precision tweezers to carefully pull out the connector and remove the camera.
Use the precision tweezers to carefully pull out the connector and remove the camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Steven Gontarz
Member since: 10/26/2016
216 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
UW Tacoma, Team 1-1, Rose Fall 2016
Member of UW Tacoma, Team 1-1, Rose Fall 2016
UWT-ROSE-F16S1G1
4 Members
6 Guides authored
