Difficulty

Moderate

Steps

4

Time Required

                          3 - 5 minutes            

Sections

2

  • Rear Case
  • 2 steps
  • Battery
  • 2 steps

Flags

0

  • BackAcer Iconia Tab 8 A1-860

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Case               
  • Insert the plastic opening tool into the seam between the back case and the display.
  • Work the plastic opening tool around the seam until the rear case separates from the display.

Insert the plastic opening tool into the seam between the back case and the display.

Work the plastic opening tool around the seam until the rear case separates from the display.

1024

Step 2

  • Separate the rear case and place the tablet face side down.

Separate the rear case and place the tablet face side down.

Step 3

              Battery               
  • Using a spudger, work the tool under the battery connector located above the battery on the left side, and lift it free.

Using a spudger, work the tool under the battery connector located above the battery on the left side, and lift it free.

Step 4

  • Pull firmly on the black tabs, located at the top left and bottom right of the battery.
  • The clear adhesive strips attached to the tabs are quite stretchy. Don’t give up; keep pulling the tabs until the battery releases. The strips will not be reusable.
  • Remove the battery.

Pull firmly on the black tabs, located at the top left and bottom right of the battery.

The clear adhesive strips attached to the tabs are quite stretchy. Don’t give up; keep pulling the tabs until the battery releases. The strips will not be reusable.

Remove the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Stephanie Nelson                     

Member since: 05/05/2016

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       iFixit, Team 1-1, Suovanen Spring 2016                        

                                                  Member of iFixit, Team 1-1, Suovanen Spring 2016 



                    FIX-SUOVANEN-S16S1G1                     


                                            3 Members                     


                                            1 Guide authored                     

Keith Riggs - Dec 3, 2016

Reply

The model I worked on has two flat black bands running across the battery from one side to the other. They appear to be wiring connecting each side of the electronics because they are connected to sockets on both sides. Didn’t want to proceed until I have more info. I have a jpg of the setup if that would help anyone (or would help me).

David - Mar 2, 2018

Reply

Is this identical to the 8 A1 850? Not finding any instructions or videos on that particular model. I can’t see a notch or anything to use as a starting point to open the tablet. Where and how do you start to open it?