Acer Iconia Tab 8 A1 860 Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          5 - 7 minutes            

Sections

3

• Rear Case
• 2 steps
• Battery
• 2 steps
• Speaker
• 2 steps

Flags

0

• BackAcer Iconia Tab 8 A1-860

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Case               

• Insert the plastic opening tool into the seam between the back case and the display.
• Work the plastic opening tool around the seam until the rear case separates from the display.

Insert the plastic opening tool into the seam between the back case and the display.

Work the plastic opening tool around the seam until the rear case separates from the display.

1024

Step 2

• Separate the rear case and place the tablet face side down.

Separate the rear case and place the tablet face side down.

Step 3

              Battery               

• Using a spudger, work the tool under the battery connector located above the battery on the left side, and lift it free.

Using a spudger, work the tool under the battery connector located above the battery on the left side, and lift it free.

Step 4

• Pull firmly on the black tabs, located at the top left and bottom right of the battery.
• The clear adhesive strips attached to the tabs are quite stretchy. Don’t give up; keep pulling the tabs until the battery releases. The strips will not be reusable.
• Remove the battery.

Pull firmly on the black tabs, located at the top left and bottom right of the battery.

The clear adhesive strips attached to the tabs are quite stretchy. Don’t give up; keep pulling the tabs until the battery releases. The strips will not be reusable.

Remove the battery.

Step 5

              Speaker               

• Use a Phillips #000 screwdriver to remove the three 3 mm screws.

Use a Phillips #000 screwdriver to remove the three 3 mm screws.

Step 6

• Use tweezers to gently lift off the connector and wires attached to the speakers.
• Remove the speakers from the device.

Use tweezers to gently lift off the connector and wires attached to the speakers.

Remove the speakers from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Michael Buchanan                     

Member since: 04/01/2019

361 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       IUPUI, Team S2-G3, Harley Spring 2019                        

                                                  Member of IUPUI, Team S2-G3, Harley Spring 2019 



                    IUPUI-HARLEY-S19S2G3                     


                                            3 Members                     


                                            2 Guides authored