Difficulty

Easy

Steps

5

Time Required

                          10 minutes            

Sections

2

  • Back Case
  • 2 steps
  • Speakers
  • 3 steps

Flags

0

  • BackAcer Iconia Tab A500

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Case               
  • To start, gently separate one corner of the case using the black spudger.

To start, gently separate one corner of the case using the black spudger.

1024

Step 2

  • Once you have successfully pried the spudger in between the front case and back case, continue do so around the entire tablet until the back case is completely disconnected.

Once you have successfully pried the spudger in between the front case and back case, continue do so around the entire tablet until the back case is completely disconnected.

Step 3

              Speakers               
  • Locate the 4 screws and cable that hold in the two speakers.
  • Use the Phillips #1 screwdriver to remove these 2mm black screws.
  • Remove the 2mm silver screws.
  • Not all 4 screws are going to be the same kind. This will not affect the speaker replacement.

Locate the 4 screws and cable that hold in the two speakers.

Use the Phillips #1 screwdriver to remove these 2mm black screws.

Remove the 2mm silver screws.

Not all 4 screws are going to be the same kind. This will not affect the speaker replacement.

Step 4

  • Carefully remove the connector cable by pushing on the rim of black plastic insert.

Carefully remove the connector cable by pushing on the rim of black plastic insert.

Step 5

  • Unfortunately, the top speaker is a wedged under the motherboard.
  • To get this speaker out, use the spudger and gently pry it out.

Unfortunately, the top speaker is a wedged under the motherboard.

To get this speaker out, use the spudger and gently pry it out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Kyle Libby                     

Member since: 04/07/2014

1,006 Reputation

                                      7 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges                           

Team

                       Cal Poly, Team 7-23, Regan Spring 2014                        

                                                  Member of Cal Poly, Team 7-23, Regan Spring 2014 



                    CPSU-REGAN-S14S7G23                     


                                            4 Members                     


                                            19 Guides authored