Difficulty
Moderate
Steps
5
Time Required
5 - 10 minutes
Sections
1
- Screen Cover Glass
- 5 steps
Flags
Missed a Step
Oops! This guide is currently missing some important steps.
BackAcer Iconia A100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen Cover Glass
- Begin with the screen facing in the upward position.
Begin with the screen facing in the upward position.
1024
Step 2
- Remove the four side pieces of the tablet.
- Start with either side and work your way around the tablet.
Remove the four side pieces of the tablet.
Start with either side and work your way around the tablet.
Step 3
- Separate the screen from the device with a plastic opening tool (four sides in total).
- Start with a plastic opening tool along the top perimeter of the tablet, the thin line, and remove the screen.
Separate the screen from the device with a plastic opening tool (four sides in total).
Start with a plastic opening tool along the top perimeter of the tablet, the thin line, and remove the screen.
Step 4
- Grab the new screen, and place on top of the tablet.
- Position it to where everything is aligned correctly.
Grab the new screen, and place on top of the tablet.
Position it to where everything is aligned correctly.
Step 5
- Put the four side pieces back in its original place.
Put the four side pieces back in its original place.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Omar Acosta
Member since: 03/03/2015
526 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
Sam Houston State, Team 13-3, Blackburne Winter 2015
Member of Sam Houston State, Team 13-3, Blackburne Winter 2015
SHSU-BLACKBURNE-W15S13G3
1 Member
3 Guides authored
