Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
1
- Hard Drive
- 4 steps
Flags
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackAcer Nitro 5 AN515-53-52FA
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
If you are curious of how much space you currently have, check this link out.
What you need
Step 1
Hard Drive
- Place the laptops with bottom facing up.
- Use a Phillips #0 screwdriver to remove the single 4.0 mm screw holding the black plastic HDD cover.
- Use the pry tool to remove the black plastic HDD cover.
Place the laptops with bottom facing up.
Use a Phillips #0 screwdriver to remove the single 4.0 mm screw holding the black plastic HDD cover.
Use the pry tool to remove the black plastic HDD cover.
1024
Step 2
- Use the Phillips #0 screwdriver to remove the four 4 mm screws holding the HDD bracket in place.
- Remove the HDD from the chassis.
Use the Phillips #0 screwdriver to remove the four 4 mm screws holding the HDD bracket in place.
Remove the HDD from the chassis.
Step 3
- Unplug the HDD from the SATA port.
- Remove HDD from bracket.
Unplug the HDD from the SATA port.
Remove HDD from bracket.
Step 4
- Use the Phillips #0 screwdriver to remove the 4 mm screws holding the back hard drive bracket.
- Remove the bracket from the device.
Use the Phillips #0 screwdriver to remove the 4 mm screws holding the back hard drive bracket.
Remove the bracket from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Alfredo Prieto
Member since: 09/01/2022
755 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
Gateway, Team 1-3, Pee Fall 2022
Member of Gateway, Team 1-3, Pee Fall 2022
GCC-PEE-F22S1G3
4 Members
5 Guides authored