Difficulty
Difficult
Steps
4
Time Required
10 - 15 minutes
Sections
1
- Track Pad
- 4 steps
Flags
0
BackAcer Nitro 5 AN515-55-55M1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Track Pad
- Turn the laptop over so its underside is up.
- Use a Phillips #0 screwdriver to remove all 7 mm screws from the bottom cover.
- Pop the cover off around the edges.
Turn the laptop over so its underside is up.
Use a Phillips #0 screwdriver to remove all 7 mm screws from the bottom cover.
Pop the cover off around the edges.
1024
Step 2
- Remove the adhesive from the battery.
- Use a Phillips #0 screwdriver to remove the two 5 mm screws.
Remove the adhesive from the battery.
Use a Phillips #0 screwdriver to remove the two 5 mm screws.
Step 3
- Remove the ribbons.
Remove the ribbons.
Step 4
- Use a Phillips #0 screwdriver to remove the two 3 mm screws.
- Pull the touchpad up and out of the computer.
Use a Phillips #0 screwdriver to remove the two 3 mm screws.
Pull the touchpad up and out of the computer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Alexander Viet-Phuoc Wang
Member since: 10/04/2022
277 Reputation
3 Guides authored
Badges:
3
Team
The Citadel Military College of South Carolina, Team 3-13, Eggleston Fall 2022
Member of The Citadel Military College of South Carolina, Team 3-13, Eggleston Fall 2022
CMCSC-EGGLESTON-F22S3G13
3 Members
3 Guides authored
