Difficulty
Easy
Steps
2
Time Required
5 minutes
Sections
1
- WI-FI Card
- 2 steps
Flags
0
BackAcer Nitro 5 AN515-55-55M1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
WI-FI Card
- Turn the laptop over so its underside is up.
- Use the PH#0 screw driver to remove all 7 mm the screws on the underside.
- Pop the cover off around the edges.
Turn the laptop over so its underside is up.
Use the PH#0 screw driver to remove all 7 mm the screws on the underside.
Pop the cover off around the edges.
1024
Step 2
- Use a Phillips #0 screwdriver to remove the single 5 mm screw that secures the Wi-Fi card.
- Remove the two attached wires from the Wi-Fi card.
- Pull the Wi-Fi card horizontally out of its socket.
Use a Phillips #0 screwdriver to remove the single 5 mm screw that secures the Wi-Fi card.
Remove the two attached wires from the Wi-Fi card.
Pull the Wi-Fi card horizontally out of its socket.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Alexander Viet-Phuoc Wang
Member since: 10/04/2022
277 Reputation
3 Guides authored
Badges:
3
Team
The Citadel Military College of South Carolina, Team 3-13, Eggleston Fall 2022
Member of The Citadel Military College of South Carolina, Team 3-13, Eggleston Fall 2022
CMCSC-EGGLESTON-F22S3G13
3 Members
3 Guides authored
