Difficulty
Easy
Steps
7
Time Required
10 minutes
Sections
1
- RAM
- 7 steps
Flags
0
BackAcer Laptop
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Shut-down your laptop and unplug the battery connection.
- Remove any other device attached to the laptop.
Shut-down your laptop and unplug the battery connection.
Remove any other device attached to the laptop.
1024
Step 2
- Remove eleven screws from the bottom case of the laptop using a Phillips #00 screwdriver.
Remove eleven screws from the bottom case of the laptop using a Phillips #00 screwdriver.
Step 3
- Slide an iFixit opening tool into the front lip of the laptop and slowly move your way around the chassis.
- Make sure not to slide the tool too deep as it can damage the board.
Slide an iFixit opening tool into the front lip of the laptop and slowly move your way around the chassis.
Make sure not to slide the tool too deep as it can damage the board.
Step 4
- Disconnect the battery by either using the iFixit opening tool or your fingers.
Disconnect the battery by either using the iFixit opening tool or your fingers.
Step 5
- Use your fingers to pull the silver latches on either side of the RAM away from each other.
- The RAM will pop up by a few centimeters.
- Remove the RAM from the laptop.
Use your fingers to pull the silver latches on either side of the RAM away from each other.
The RAM will pop up by a few centimeters.
Remove the RAM from the laptop.
Step 6
- Reconnect the battery pins
- While reconnecting the battery, try not to touch the metal prongs.
Reconnect the battery pins
While reconnecting the battery, try not to touch the metal prongs.
Step 7
- Place the back panel on to your laptop and gently press on it until it snaps in place.
- Screw the back panel back in.
- When turning on your laptop the first time after installing new RAM, it may take the laptop a few minutes to turn on.
Place the back panel on to your laptop and gently press on it until it snaps in place.
Screw the back panel back in.
When turning on your laptop the first time after installing new RAM, it may take the laptop a few minutes to turn on.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Hanzala Mir
Member since: 01/17/2022
170 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
York University, Team S-18, Woodhouse Winter 2022
Member of York University, Team S-18, Woodhouse Winter 2022
YORK-WOODHOUSE-W22SSG18
1 Member
1 Guide authored
