Difficulty
Easy
Steps
3
Time Required
3 minutes
Sections
2
- Bottom Cover
- 1 step
- RAM
- 2 steps
Flags
0
BackAcer Nitro 5 AN517-51-56YW
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Cover
- Place the laptop upside-down so that the fans are facing away from you.
- Remove the twelve 6.7 mm screws from the bottom cover using a Phillips #1 screwdriver.
- Pry the bottom cover away from the laptop using a spudger.
Place the laptop upside-down so that the fans are facing away from you.
Remove the twelve 6.7 mm screws from the bottom cover using a Phillips #1 screwdriver.
Pry the bottom cover away from the laptop using a spudger.
1024
Step 2
RAM
- Use your fingers to pry apart the two metal brackets on either side of the RAM.
- The RAM will pop up.
Use your fingers to pry apart the two metal brackets on either side of the RAM.
The RAM will pop up.
Step 3
- Pull the card straight towards yourself.
Pull the card straight towards yourself.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Colin Moore
Member since: 09/23/2022
85 Reputation
1 Guide authored
Badges:
2
Team
University of Memphis, Team 3-1, Lane Fall 2022
Member of University of Memphis, Team 3-1, Lane Fall 2022
UM-LANE-F22S3G1
5 Members
4 Guides authored
