Difficulty
Easy
Steps
4
Time Required
5 - 20 minutes
Sections
2
- Bottom Cover
- 1 step
- SSD
- 3 steps
Flags
0
BackAcer Nitro 5 AN517-51-56YW
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Before replacing the SSD, make sure you have a compatible SSD replacement. SSDs that are non-compatible will result in an inoperative computer.
What you need
Step 1
Bottom Cover
- Place the laptop upside-down so that the fans are facing away from you.
- Remove the twelve 6.7 mm screws from the bottom cover using a Phillips #1 screwdriver.
- Pry the bottom cover away from the laptop using a spudger.
Place the laptop upside-down so that the fans are facing away from you.
Remove the twelve 6.7 mm screws from the bottom cover using a Phillips #1 screwdriver.
Pry the bottom cover away from the laptop using a spudger.
1024
Step 2
SSD
- Remove the two 2.9 mm screws from the SSD cover using a Phillips #1 screwdriver.
Remove the two 2.9 mm screws from the SSD cover using a Phillips #1 screwdriver.
Step 3
- Remove the SSD plate cover.
Remove the SSD plate cover.
Step 4
- Carefully pull the SSD out of the socket.
- Place the new SSD stick into the slot until a click is heard.
Carefully pull the SSD out of the socket.
Place the new SSD stick into the slot until a click is heard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Billy Smith
Member since: 09/15/2022
97 Reputation
1 Guide authored
Badges:
2
Team
University of Memphis, Team 3-1, Lane Fall 2022
Member of University of Memphis, Team 3-1, Lane Fall 2022
UM-LANE-F22S3G1
5 Members
4 Guides authored
