Acer One 10 S1002 145 A Camera Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Motherboard
8 steps
Battery
1 step
Camera
1 step

Flags

BackAcer One 10 S1002-145A
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Motherboard

Make sure that the tablet is turned off and disconnected from any power source.
Disconnect the tablet from the keyboard attachment.
If you have a Micro SD card in the tablet, remove it now.
Remove the two 3.5 mm Phillips #0 screws on either side the keyboard connection.

Make sure that the tablet is turned off and disconnected from any power source.

Disconnect the tablet from the keyboard attachment.

If you have a Micro SD card in the tablet, remove it now.

Remove the two 3.5 mm Phillips #0 screws on either side the keyboard connection.

1024

Step 2

Starting from a corner of the tablet, use the plastic opening tool to create a gap between the screen and the back covering.
Slowly maneuver the plastic opening tool along the perimeter of the tablet to pry the screen and back covering apart.
Separate the back covering from the screen.

Starting from a corner of the tablet, use the plastic opening tool to create a gap between the screen and the back covering.

Slowly maneuver the plastic opening tool along the perimeter of the tablet to pry the screen and back covering apart.

Separate the back covering from the screen.

Step 3

Peel off all of the Polyimide tape (yellow tape).
Remove the metallic tape covering the keyboard connection.

Peel off all of the Polyimide tape (yellow tape).

Remove the metallic tape covering the keyboard connection.

Step 4

Unscrew the two 3.5mm Phillips #0 screws and open the ZIF latch.
Gently remove the silver part covering the battery and set it aside.

Unscrew the two 3.5mm Phillips #0 screws and open the ZIF latch.

Gently remove the silver part covering the battery and set it aside.

Step 5

Open the ZIF (Zero Insertion Force) connectors .
Gently remove the ribbon cables.

Open the ZIF (Zero Insertion Force) connectors .

Gently remove the ribbon cables.

Step 6

Remove the four 4mm screws at the corners of the motherboard with the Phillips#0 bit screw.
The screw beneath the metallic tape also needs to be removed.

Remove the four 4mm screws at the corners of the motherboard with the Phillips#0 bit screw.

The screw beneath the metallic tape also needs to be removed.

Step 7

Disconnect the three cables on the motherboard closest to the battery.
These cables require some extra prying power to be removed.

Disconnect the three cables on the motherboard closest to the battery.

These cables require some extra prying power to be removed.

Step 8

Slide out the motherboard and put it aside.

Slide out the motherboard and put it aside.

Step 9

              Battery

Use the plastic opening tool to separate the glue that holds the battery to the screen.
Avoid putting pressure on the glass while separating the battery from the screen.
Remove the battery and set it aside.

Use the plastic opening tool to separate the glue that holds the battery to the screen.

Avoid putting pressure on the glass while separating the battery from the screen.

Remove the battery and set it aside.

Step 10

              Camera

Separate the adhesive cable from the underlying copper ribbon cable.
Gently pry off the camera from from tablet backing.
Remove the camera and set it aside.

Separate the adhesive cable from the underlying copper ribbon cable.

Gently pry off the camera from from tablet backing.

Remove the camera and set it aside.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors

                    Shannon Griffin

Member since: 10/03/2016

1,339 Reputation

                                      5 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges

Team

                       USF Tampa, Team 1-3, Sullivan Fall 2016                        

                                                  Member of USF Tampa, Team 1-3, Sullivan Fall 2016 



                    USFT-SULLIVAN-F16S1G3                     


                                            4 Members                     


                                            5 Guides authored

jenny - Sep 18, 2017

++hi i have acer 10 (tablet with laptop) it was pressed with F2 & F10 still has white cursor last 48 hours, please advise and Im not calling support for another 2.5 hours then they say do reset and hang up:(++

No screen

no power now

no rear camera was initial reason for calling horrid acer for customer service

jenny - Sep 19, 2017

I was worried camera was broken but discovered after black screen and not working touch screen and mouse, it was not the case:

Got Acer 10 Tablet with Keyboard S1002 12V2 repaired:

by removing tablet from keyboard

2)pressing the volume down into volume position and pressing power at same time 30 secs

3)reset menu comes on and screen loads as normal

restart device

(when there is a problem with this two in one tablet, the device thinks it’s a tablet before a pc)

admin prompts given after a restart is done which took about 40 mins; restart and flourish

***after restarting the whole pc began to work including front and rear cameras which was the issue I had contacted acer support about in the first place!)

Abhai - Jan 21, 2018

I am facing a big problem right now….!!

There are no screws in my tab

I can’t find those screws as shown in the picture……its just plane with all those holes nearby….

Please help me….I’m facing heavy issues……!!

Introduction#

What you need#

Team#

Introduction

What you need

Team