Acer One 10 S1003 114M Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 20 minutes

Sections

Battery
8 steps

Flags

BackAcer One 10 S1003-114M
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Make sure the device is turned off and disconnected from any power source.
To disconnect the tablet from the keyboard attachment, open the laptop and lift the tablet component up from the keyboard dock.

Make sure the device is turned off and disconnected from any power source.

To disconnect the tablet from the keyboard attachment, open the laptop and lift the tablet component up from the keyboard dock.

1024

Step 2

While handling the device, make sure to avoid pushing the power button. Device must remain powered off.
Metal spudgers and similar prying tools can damage internal components like the motherboard. It is ideal to use a regular black nylon spudger or a plastic opening tool, but for this device the metal jimmy and spudger were the only tools that worked.
Starting from the corner of the tablet, use a jimmy to create a gap between the screen and the back covering.
Insert a metal spudger in the gap that you created with the Jimmy.
Slowly maneuver the metal spudger along the perimeter of the tablet to pry the screen and back covering apart.
Separate the back covering from the screen.

While handling the device, make sure to avoid pushing the power button. Device must remain powered off.

Metal spudgers and similar prying tools can damage internal components like the motherboard. It is ideal to use a regular black nylon spudger or a plastic opening tool, but for this device the metal jimmy and spudger were the only tools that worked.

Starting from the corner of the tablet, use a jimmy to create a gap between the screen and the back covering.

Insert a metal spudger in the gap that you created with the Jimmy.

Slowly maneuver the metal spudger along the perimeter of the tablet to pry the screen and back covering apart.

Separate the back covering from the screen.

Step 3

Using your hands, peel off the Polyimide tape (yellow tape).

Using your hands, peel off the Polyimide tape (yellow tape).

Step 4

Using the Phillips #00 screwdriver, unscrew the two 2mm screws at the bottom of the tablet and open the ZIF latch.
Gently remove the gold ribbon cable covering the battery and set it aside.

Using the Phillips #00 screwdriver, unscrew the two 2mm screws at the bottom of the tablet and open the ZIF latch.

Gently remove the gold ribbon cable covering the battery and set it aside.

Step 5

Using the Phillips #00 screwdriver, unscrew the two 2mm screws at the top right of the battery.

Using the Phillips #00 screwdriver, unscrew the two 2mm screws at the top right of the battery.

Step 6

Peel the three shiny black stickers from the battery (top left, bottom right, and bottom left), but keep them attached to the motherboard.

Peel the three shiny black stickers from the battery (top left, bottom right, and bottom left), but keep them attached to the motherboard.

Step 7

Battery is adhered to the tablet.
Avoid putting pressure on the glass while separating the battery from the screen.
Use the spudger to separate the battery from glue that holds the battery to the screen. Carefully pry the battery from the tablet.

Battery is adhered to the tablet.

Avoid putting pressure on the glass while separating the battery from the screen.

Use the spudger to separate the battery from glue that holds the battery to the screen. Carefully pry the battery from the tablet.

Step 8

Remove the battery from the device.

Remove the battery from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 3 other contributors

                    Rachel Harrison

Member since: 04/09/2018

581 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Eastern Washington University, Team S1-G5, Carnegie Spring 2018                        

                                                  Member of Eastern Washington University, Team S1-G5, Carnegie Spring 2018 



                    EWU-CARNEGIE-S18S1G5                     


                                            4 Members                     


                                            4 Guides authored

Ronny Merino Gonzalez - Jan 6, 2023

Where can I find the battery for this?

Introduction#

What you need#

Team#

Introduction

What you need

Team