Difficulty

Easy

Steps

13

Time Required

                          10 minutes

Sections

1

  • Track Pad
  • 13 steps

Flags

0

  • BackAcer One 10 S1003-114M

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Track Pad
  • Open the screen.

Open the screen.

1024

Step 2

  • Remove the screen portion from the keyboard.

Remove the screen portion from the keyboard.

Step 3

  • Turn over the keyboard and use the plastic pry tool to remove the two adhesive backed rubber pads furthest from the hinge.

Turn over the keyboard and use the plastic pry tool to remove the two adhesive backed rubber pads furthest from the hinge.

Step 4

  • Remove ten total screws from the back cover with a Phillips #1 screwdriver.
  • 8 screws 4.25mm in length with 4.00mm diameter heads.
  • 2 screws 6.00mm in length with 4.00mm diameter heads.

Remove ten total screws from the back cover with a Phillips #1 screwdriver.

8 screws 4.25mm in length with 4.00mm diameter heads.

2 screws 6.00mm in length with 4.00mm diameter heads.

Step 5

  • Use the plastic opening tool to separate the front and back halves of the keyboard.

Use the plastic opening tool to separate the front and back halves of the keyboard.

Step 6

  • Lift away the loosened back cover.

Lift away the loosened back cover.

Step 7

  • Use an opening tool to remove/peel off the adhesive tape from the trackpad electrical connector

Use an opening tool to remove/peel off the adhesive tape from the trackpad electrical connector

Step 8

  • Use an opening tool to flip/pop the switch holding down the electric connector to the keyboard.

Use an opening tool to flip/pop the switch holding down the electric connector to the keyboard.

Step 9

  • Use the fine tip tweezers to remove the electrical connector for the trackpad. Pull gently.

Use the fine tip tweezers to remove the electrical connector for the trackpad. Pull gently.

Step 10

  • To free the retainer, remove the 2 mount screws, 3.50mm length and 4.90mm diameter heads, with a Phillips #0 screwdriver.

To free the retainer, remove the 2 mount screws, 3.50mm length and 4.90mm diameter heads, with a Phillips #0 screwdriver.

Step 11

  • To free the trackpad, remove the 2 mount screws, 3.50mm length and 4.90mm diameter heads, with a Phillips #0 screwdriver.

To free the trackpad, remove the 2 mount screws, 3.50mm length and 4.90mm diameter heads, with a Phillips #0 screwdriver.

Step 12

  • Use a pair of fine tip tweezers to remove the adhesive metallic strap holding the trackpad to the keyboard.

Use a pair of fine tip tweezers to remove the adhesive metallic strap holding the trackpad to the keyboard.

Step 13

  • Gently remove the trackpad from the keyboard.

Gently remove the trackpad from the keyboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Karan Karthik

Member since: 04/01/2019

217 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       IUPUI, Team S2-G6, Harley Spring 2019                        

                                                  Member of IUPUI, Team S2-G6, Harley Spring 2019 



                    IUPUI-HARLEY-S19S2G6                     


                                            4 Members                     


                                            2 Guides authored