Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Hard Drive
- 3 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackAcer P446
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Removing the Rear Cover
- Using a Phillips head screw-driver remove all the screws from the rear casing of the Acer P446 Unit.
- Side note: when lifting the rear cover away from the unit lift away from the VGA/HDMI Ports as the case slides into these and although you can lift it straight off you may damage the plastic
Using a Phillips head screw-driver remove all the screws from the rear casing of the Acer P446 Unit.
Side note: when lifting the rear cover away from the unit lift away from the VGA/HDMI Ports as the case slides into these and although you can lift it straight off you may damage the plastic
1024
Step 2
- You now have access to the RAM, Hard Drive, Batteries etc. from removing this cover to remove the hard drive simply lift UP the cable that connects to the Motherboard as shown and LIFT the Hard Drive right out
You now have access to the RAM, Hard Drive, Batteries etc. from removing this cover to remove the hard drive simply lift UP the cable that connects to the Motherboard as shown and LIFT the Hard Drive right out
Step 3
- If you wish to connect the Hard Drive to an external Caddy or install it in a new machine simply remove the SATA Adapter by pulling it away from the Hard Drive
If you wish to connect the Hard Drive to an external Caddy or install it in a new machine simply remove the SATA Adapter by pulling it away from the Hard Drive
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 1 other contributor
Troy McGarry
Member since: 07/27/2016
161 Reputation
1 Guide authored
Badges:
5
+2 more badges