Difficulty
Moderate
Steps
8
Time Required
10 - 15 minutes
Sections
1
- Bundled Cable Connector
- 8 steps
Flags
0
BackAcer S200HL LCD Monitor
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Removing the Stand
- Place the monitor screen face down.
- Firmly hold the base of the stand with one hand and the bottom of the monitor with the other hand.
- Pull the stand away from the monitor.
Place the monitor screen face down.
Firmly hold the base of the stand with one hand and the bottom of the monitor with the other hand.
Pull the stand away from the monitor.
1024
Step 2
Removing the Back Panel
- Use the plastic opening tool to pry the back panel from the front panel.
- Start at one point of the crease and pry along the entire monitor for the best results.
Use the plastic opening tool to pry the back panel from the front panel.
Start at one point of the crease and pry along the entire monitor for the best results.
Step 3
- Gently lift the back panel away from the monitor.
Gently lift the back panel away from the monitor.
Step 4
Removing Interior Motherboard Casing
- Be sure to keep track of where you place your screws. A magnetic mat is great for keeping your screws in one spot.
- Unscrew the four 7.5 mm Phillips #2 screws connecting the motherboard to the metal casing.
Be sure to keep track of where you place your screws. A magnetic mat is great for keeping your screws in one spot.
Unscrew the four 7.5 mm Phillips #2 screws connecting the motherboard to the metal casing.
Step 5
- Remove the four 10 mm hex screws.
Remove the four 10 mm hex screws.
Step 6
- Gently lift the motherboard casing from the monitor.
Gently lift the motherboard casing from the monitor.
Step 7
Removing the Bundled Cable Connections
- Pull the bundled cable connector gently away from motherboard.
Pull the bundled cable connector gently away from motherboard.
Step 8
- Grasp the other side of the bundled cable connector and gently pull the connector away from the screen.
Grasp the other side of the bundled cable connector and gently pull the connector away from the screen.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Jeffrey Kong
Member since: 09/22/2014
767 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 12-3, Forte Fall 2014
Member of Cal Poly, Team 12-3, Forte Fall 2014
CPSU-FORTE-F14S12G3
5 Members
5 Guides authored
