Difficulty

Moderate

Steps

6

Time Required

                          15 minutes

Sections

2

  • Back Panel
  • 3 steps
  • Battery
  • 3 steps

Flags

0

  • BackAcer Spin 3 SP315-51-757C

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Remove eleven Phillips #0 screws from the back panel.

Remove eleven Phillips #0 screws from the back panel.

1024

Step 2

  • Using an opening tool, pry open the back panel, starting at the silver screen hinges.
  • You may need to apply more force than usual. If you don’t find any success at the hinges, you can try to start at another area that looks easier to open.
  • You can also use some plastic opening picks to help hold parts of the panel open while you work on other sides.

Using an opening tool, pry open the back panel, starting at the silver screen hinges.

You may need to apply more force than usual. If you don’t find any success at the hinges, you can try to start at another area that looks easier to open.

You can also use some plastic opening picks to help hold parts of the panel open while you work on other sides.

Step 3

  • Lift the back panel off of the laptop.

Lift the back panel off of the laptop.

Step 4

              Battery
  • Remove the two Phillips #0 screws holding the battery inside the laptop case.

Remove the two Phillips #0 screws holding the battery inside the laptop case.

Step 5

  • Using either your hands or a pair of tweezers, carefully pull the battery’s cable out of its motherboard port.

Using either your hands or a pair of tweezers, carefully pull the battery’s cable out of its motherboard port.

Step 6

  • Using your hands, lift up on the battery from its slot, and carefully slide it away from you before fully lifting it out of the case.

Using your hands, lift up on the battery from its slot, and carefully slide it away from you before fully lifting it out of the case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors 


                    Skyler Ognibene

Member since: 09/17/2019

898 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Embry-Riddle Aeronautical University, Team S20-G2, Branham Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S20-G2, Branham Fall 2019 



                    ERAU-BRANHAM-F19S20G2                     


                                            4 Members                     


                                            6 Guides authored

E L - Mar 28, 2021

Reply

Wasted $50 on a battery that doesn’t work. I’m still trying to find why my Acer 2 in 1 will no longer turn on.

Adam Kahler - Mar 29, 2021

That is a bummer, and something that concerns me as well. I’d like to replace the battery but it’s so common to get a failed battery or one that fails in a short period of time. Recently I’ve purchased two consecutive bad lithium drill batteries from ebay. Hope you get your computer figured out.

Adam Kahler - Mar 29, 2021

Reply

I believe this guide would apply to most or all of the SP315-51-XXX laptops. I have a -79NT and the process and internals look the same.